Inserting The Microsd Card; Removing The Mcrosd Card; Connecting And Loading Files - Visual Land V-TOUCH PRO Manual

INSERTING THE MICRO SD CARD
Ensure that the player is powered off, and discon-
nected from the computer. Hold the Micro SD card
face up (side with words aligned in the opposite
direction of the display screen), and slide the card
When you hear the card click into place, you can
access the card.
REMOVING THE MICRO SD CARD
Ensure that the player is powered off, and push the
release pressure, and the card will slide out.
Caution: Please ensure that the power is off when
you connect or disconnect your SD card, or damage
may occur to the player and/or your card.

CONNECTING AND LOADING FILES

Connect the player to a working USB port on a com-
puter. Once connected, a gray and green icon called
"Safely Remove Hardware" will appear in the system
tray (lower right hand corner of the desktop). A
driver may need to be downloaded automatically, so
please be connected to the internet when connect-
ing device. Once you connect it to your computer it
should prompt you that the device is connected or
prompt for a driver, if it asks for a driver allow it to
Copyright©2011 Visual Land Inc. www.visual-land.com 7