Gigabyte GA-F2A75M-HD2 User Manual page 32

` PC Health Status
& Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. (Default)
Disabled
Clears the record of previous chassis intrusion status and the Case Open field will show
Enabled
"No" at next boot.
& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& CPU Vcore/Dram Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System FAN Speed
Displays current CPU/system fan speeds.
& CPU Fan Speed Control
Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed.
Allows the CPU fan to run at different speeds according to the CPU temperature. You can
Normal
adjust the fan speed with EasyTune based on your system requirements. (Default)
Allows the CPU fan to run at slow speeds.
Silent
Allows you to control the CPU fan speed under the Slope PWM item.
Manual
Allows the CPU fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is
set to Manual. Options are: 0.75 PWM value /
& System Fan Speed Control
Allows you to determine whether to enable the system fan speed control function and adjust the fan speed.
C ~ 2.50 PWM value / C.
o o
- 32 -