Using The Wink Self-Timer - Canon PowerShot S95 Getting Started

Using the Wink Self-Timer

Point the camera at a person and press the shutter button fully. The camera
will shoot approximately two seconds after it detects a wink.
What if a wink is not detected?
• Wink a bit slowly.
• A wink may not be detected if eyes are covered by hair or a hat, or when wearing
glasses.
Choose .
●
Follow Steps 1 – 2 on p. 61 to choose
then press the l button.
●
Press the qr buttons or turn the Ê dial to
, then press the l button.
choose
Compose the shot and press the
shutter button halfway.
●
Confirm that a green frame appears around
the face of the person who will wink.
Press the shutter button fully.
X
The camera will enter shooting stand-by,
and [Wink to take picture] will appear on the
screen.
X
The lamp will blink and the self-timer sound
will play.
Face the camera and wink.
X
The shutter will release approximately 2
seconds after a wink is detected from the
person with a frame around the person's face.
●
To cancel the countdown, press the p
button.
,
65