Table of Contents
Advertisement
Model 562A
SECTION III
OPERATION
3-1. OPERATING CONTROLS.
The operating controls consist of the following:
POWER ON,
supplies power to the recorder when in the ON position.
Section III
RECORD ON,
allows the printer mechanism to operate when in the ON position. When the
switch is in the spring-loaded position(down), the recorder prints at maximum
rate. The middle p osition is a standby position(allows analog to be taken).
SPACE SELECTOR,
selects the number of spaces between readout prints.
PAPER ADVANCE,
manually advances paper.
ANALOG CONTROLS,
(optional) refer to text.
3-2. PAPER TAPE.
Special
~folded
tape is recommended for use with the recorder.
High-quality
standard 3 -inch rolled adding machine type may also be used.
Folded tape permits convenient take -up in the paper drawer and allows easy
inspection of any portion of the type.
It is perforated at each fold to allow neat
separation of portions of recorded data.
Folded tape may be reversed and re-
run to use both sides.
With single spacing, about 15, 000 prints can be made
on one side of a folded pad.
One pad will last about 40 minutes at maximum
print rate.
To install the paper tape proceed as follows:
a. Open front panel.
b.
Load paper in compartment.
c. Fold paper back one inch and crease.
Insert paper between roller and
guide plate.
01081-1
3-1
Advertisement
Table of Contents
