Assembling Your Electric Knife; Using Your Electric Knife - W.P. Appliances Wolfgang Puck Use And Care Manual

DL_ElectricKnife09 5/24/09 1:04 PM

Assembling Your Electric Knife

1 Be sure cord is not connected to electric outlet
figure 1
when removing or inserting blades and when
knife is not in use.
2 Blades are sharp. Handle carefully. Always
handle blades with hand away from cutting
edge. Always store blades with cutting edge
away from you.
3 If blades are separated, slide the rivet on one
blade into the keyhole slot in the other blade
until they are locked together. Always use both
blades. Do not attempt to operate the knife
with only one blade.
4 Hold the blades together at the blade guards
with cutting edge down. Slide into motor unit
until both blades click into place.
(See figure 1)
Page 7
7

Using Your Electric Knife

1 Plug your electric knife into a 120 volt 60 AC
figure 2
only outlet.
2 To operate, first depress safety switch
by grasping knife handle. Next press On/Off
button with your thumb while sliding
it forwards.
3 To stop, release on/Off button and
safety switch.
4 To rotate blade, first unplug from outlet. Then
slide the lock button (located on bottom of
motor housing) back firmly while grasping
motor housing. Rotate handle to desired
cutting angle while continuing to hold lock
button. The handle will turn and lock.
5 To disassemble knife, first unplug cord
from outlet.
Warning: Blades are sharp. Handle carefully.
Always handle blades with hand away from
cutting edge. Always store blades with cutting
edge away from you.
Firmly press blade release button. Grasp blade
guards and carefully pull until the blades release.
(See figure 2) Carefully separate blades by sliding
apart to disengage rivet from keyhole.
8
Meijer.com