Advertisement
Power OFF
Power ON
Position
Position
Power/Charging Indicator
Charging the iHM64
USB Connection
LED
Note: When not in use, turn speaker off
to save battery power.
2-in-1 Charging/Audio
Cable included
mobile phone
PSP
iPod
MP3/MP4
PC
Laptop
Connect To Audio Source
Using the iHM64
Press down gently on speaker to power it ON or OFF.
Connecting the iHM64
NOTE: A special battery-saving feature prevents the speaker
from powering on unless the micro-USB plug is connected.
Check your USB connections before using.
• Connect the micro-USB plug to the USB connection on the
speaker.
• Connect the 3.5mm audio plug to the headphone jack or
line-out of any audio device.
• Press down on the speaker to turn it ON. The white Power
indicator light will come on. (Pressing down again will turn
the speaker OFF).
• Press play on your audio device and adjust its volume to
listen to audio.
Note: the larger USB plug is used for charging only, not
for audio. Please refer to next section for charging
Charging the iHM64
The iHM64 is powered by a rechargeable battery in the
speaker. When the white power light dims, or if you start to
notice sound distortion at higher volumes, it's time to recharge
the battery.
• Connect the larger USB plug to a powered USB port, such as
that on a computer. The indicator light on the speaker will
turn to red while charging and turn white when fully charged.
Note: you can continue to listen to the speaker while it is
charging.
The rechargeable battery in your speaker can be replaced
only by iHome Consumer Repair Department.
Advertisement
