Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Dual Screen Video Processor
© 2008 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly
prohibited.
Model
DVI-SPLITPRO-2BB
www.avenview.com
User's Guide
1
Advertisement
Table of Contents
Related Manuals for Avenview DVI-SPLITPRO-2BB
Summary of Contents for Avenview DVI-SPLITPRO-2BB
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
-
Page 2: Table Of Contents
Control-Setting Dialog ....................15 Section 3: Specifications and Supported Resolutions ................19 Specifications ........................19 Supported Resolutions ......................20 3.2.1 DVI / Component / VGA ....................20 3.2.2 VGA ..........................20 3.2.3 DVI-OUT ........................21 Section 4: General Troubleshooting..................... 22 www.avenview.com... - Page 3 www.avenview.com...
-
Page 4: Section 1: Getting Started
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. www.avenview.com... -
Page 5: Introduction
WUXGA (1920x1200). Dual outputs are provided in both analog (VGA) and digital (DVI) format, one is connected to remote display and the other is connected to on-site display for real time monitoring. www.avenview.com... -
Page 6: Features
Before you start the installation of the converter, please check the package contents. DVI-SPLITPRO-2B DVI – DVI & VGA breakout Cable VGA to Component breakout Cable VGA to DVI Adapter IR Remote Control Software CD AC Power Supply User’s Manual www.avenview.com... -
Page 7: Device Features
1.6.1 Inputs and Outputs The Avenview DVI-SPLITPRO-2B has 4 inputs and accepts both graphics and video signals, which come from computers (DVI or VGA) and NTSC/PAL video sources. You can pick up 2 of the 4 inputs and then display 2 of them simultaneously on the same screen. -
Page 8: I/O Connectors
Do not twist or pull by force ends of the optical cables. It can cause malfunction. To prevent fire or shock hazards, do not expose this device to rain or moisture. Do not immediately use after moving from low temperature to high temperature as this causes condensation www.avenview.com... -
Page 9: Section 2: Installation
7. Connect a device equipped with VGA output (such as laptop) to the VGA connector of DVI-SPLITPRO-2B. 8. Connect a device equipped with composite video output to composite input of the DVI-SPLITPRO-2B. 9. Connect your computer with the DVI-SPLITPRO-2B by a 9-pin RS-232 cable and then install the software. www.avenview.com... -
Page 10: Ir Remote Control
17. H Flip Flip Horizontally 18. SWAP Swap between main channel and sub-channel (only works in PIP or PAP mode) 19. PIP Changes mode: Full Screen, PIP and PAP 20. Sub Pause Freeze sub-channel 21. Main Pause Freeze main channel www.avenview.com... -
Page 11: On Screen Display Menu
On Screen Display Menu www.avenview.com... - Page 12 800×600 @60Hz, 1280×768 @60Hz, 1440×900 @60Hz, 1920×1080 @50Hz Resolution 1024×768 @60Hz, 1280×1024 @50Hz, 1400×1050 @50Hz, 1920×1080 @60Hz Selection: 1152×864 @75Hz, 1280×1024 @60Hz, 1400×1050 @60Hz, 1920×1200 @50Hz 1280×720 @50Hz, 1366×768 @60Hz, 1600×1200 @60Hz, 1920×1200 @60Hz 1280×720 @60Hz www.avenview.com...
-
Page 13: System Requirements
Ensure that DVI-SPLITPRO-2B is powered on. Please ensure that serial cable (RS232) is connected properly and available serial port is free to be used by DVI-SPLITPRO-2B If the serial connection is established, you will see a Windows as shown below: www.avenview.com... -
Page 14: Software Operation
Enable or Disable auto sleep function if there is no video signal detected in the main channel Device ID Define Device ID of each DVI-SPLITPRO-2B especially when multiple devices are cascaded Factor Reset Restore all system settings to factory default Exit Quit the software Background Resolution Change the output resolution www.avenview.com... -
Page 15: Control-Setting Dialog
When selected the label on the screen for each channel will display its corresponding input channel type. When not selected the user can input the desired string to be displayed Duty Cycle Enables blinking of OSD borders and labels Frequency Select how fast OSD border and labels blink www.avenview.com... - Page 16 2. While Blend is selected, users can use the slider to control the control the degree of blending Color: 1. Select the main or sub channels 2. Reset: Restore all the setting on this page back to their factory default settings. www.avenview.com...
- Page 17 2. The organ border indicates which pattern is currently selected. Users can choose one of the provided patterns by moving cursor and clicking at the desired one Users can define the pattern’s color by changing Red, Green and Blue values www.avenview.com...
- Page 18 1. Select the main or sub channel 2. The fine movement of the selected channel EDID Code: 1. Save: Save the read back EDID Content in 2. Setting: Automatically setup the output resolution according to the content of EDID www.avenview.com...
-
Page 19: Section 3: Specifications And Supported Resolutions
WE/SS 8P8C with 2 LED indicators IR Remote Control Dimensions 7.1" x 4” x 0.9" (L x W x H) Power Supply 5V 4A DC Power Consumption 10 Watts (max) Operating Temperature 0~40°C [32~104°F] Storage Temperature -20~60°C [-4~140°F] Relative Humidity 20~90% RH [no condensation] www.avenview.com... -
Page 20: Supported Resolutions
1920x1200 @60Hz VESA 800x600 @56Hz VESA 800x600 @60Hz VESA 800x600 @72Hz VESA 800x600 @75Hz VESA 800x600 @85Hz 3.2.2 VGA Supported Mode Resolution VESA 640x480 @60Hz VESA 800x600 @60Hz VESA 1024x768 @60Hz VESA 1280x1024 @60Hz VESA 1600x1200 @60Hz VESA 1920x1200 @60Hz www.avenview.com... -
Page 21: Dvi-Out
VESA 800x600 @60Hz VESA 1024x768 @60Hz VESA 1152x864 @75Hz VESA 1280x1024 @60Hz VESA 1280x1024 @50Hz VESA 1280x768 @60Hz VESA 1366x768 @60Hz VESA 1400x1050 @60Hz VESA 1400x1050 @50Hz VESA 1152x864 @75Hz VESA 1600x1200 @60Hz VESA 1920x1200 @50Hz VESA 1920x1200 @60Hz www.avenview.com... -
Page 22: Section 4: General Troubleshooting
Press “Auto” key on the remote control Image Position Shifted Auto color configuration only works at VGA and Component inputs Press “Color Balance” key for auto configuration. Wrong Color Auto color configuration only works at VGA and Component inputs. www.avenview.com... - Page 23 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the DVI-SPLITPRO-2BB and is the answer not in the manual?
Questions and answers