Choosing Photo Every 2,5,10,30,60 Seconds Timing; Led Blinking On/Off; Ntsc/Pal Setting; Delete Last File Saved - GoPro Hero Instructions Manual

CHOOSING PHOTO EVERY 2,5,10,30,60 SECONDS TIMING
You can shoot a photo every 2,5, 10,30, or 60 seconds, ongoing, with the "Photo every X seconds" mode.
When you see P2 (photo every 2 seconds is the default setting), you can press the SHUTTER button to
toggle the following options:
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING LED BLINKING ON I OFF
You can set the red LED light to blink while filming or to be off at all times, for stealth:
bLO (default setting)
bLF
LED blinking ON
LED blinking OFF
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING BEEPING SOUND ON I OFF
You can set the beeping sound to beep or be silent at all times, for stealth:
bPO (default setting)
bPF
beeping sound ON
beeping sound OFF
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING NTSC I PAL SETTING
This controls the video output of the camera when viewing on a TV.
Select nSC (NTSC) if viewing on a TV in North America. Choose PAL if viewing on a PAL TV (most
televisions outside of North America). or if viewing on a PAL TV in any region.
nSC (default setting)
PAL
NTSC TV setting for North America
PAL TV setting for most regions outside of North America.
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
•
DELETE LAST FILE SAVED
When "LSi" is on the LCD screen, you can delete the last file saved to the SO card:
LSt
LSt (blinking)
TO CHOOSE NO DELETE
LSt (blinking)
TO CHOOSE YES
DELETE
To delete last file saved to camera, press SHUTTER button when LSt is
on screen. LSt will start blinking as a warning.
"LSt" will blink for 5 seconds. If you do nothing..."LSt" will stop blinking
and the file will NOT be deleted. You can press the POWER/MODE
button to advance to the next option in the SET menu.
If you press the shutter button while LSt is blinking, you will deleted the
last saved file from the SO card.
CHOOSING PHOTO EVERY 2,5,10,30,60 SECONDS TIMING
You can shoot a photo every 2,5, 10,30, or 60 seconds, ongoing, with the "Photo every X seconds" mode.
When you see P2 (photo every 2 seconds is the default setting), you can press the SHUTTER button to
toggle the following options:
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING LED BLINKING ON I OFF
You can set the red LED light to blink while filming or to be off at all times, for stealth:
bLO (default setting)
bLF
LED blinking ON
LED blinking OFF
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING BEEPING SOUND ON I OFF
You can set the beeping sound to beep or be silent at all times, for stealth:
bPO (default setting)
bPF
beeping sound ON
beeping sound OFF
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING NTSC I PAL SETTING
This controls the video output of the camera when viewing on a TV.
Select nSC (NTSC) if viewing on a TV in North America. Choose PAL if viewing on a PAL TV (most
televisions outside of North America). or if viewing on a PAL TV in any region.
nSC (default setting)
PAL
NTSC TV setting for North America
PAL TV setting for most regions outside of North America.
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
•
DELETE LAST FILE SAVED
When "LSi" is on the LCD screen, you can delete the last file saved to the SO card:
LSt
LSt (blinking)
TO CHOOSE NO DELETE
LSt (blinking)
TO CHOOSE YES
DELETE
To delete last file saved to camera, press SHUTTER button when LSt is
on screen. LSt will start blinking as a warning.
"LSt" will blink for 5 seconds. If you do nothing..."LSt" will stop blinking
and the file will NOT be deleted. You can press the POWER/MODE
button to advance to the next option in the SET menu.
If you press the shutter button while LSt is blinking, you will deleted the
last saved file from the SO card.