Advertisement
Quick Links
Edition
1st Edition
Car Driving Recorder
Copyright
This publication contains information that is protected by
IAT- Car DVR 1
copyright. No part of it may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any
language without permission from the copyright holders.
Copyright © 2
Integrated in a Rearview Mirror with
All rights reserved
2.4" LCD Monitor, GPS Logger, and
Bluetooth Hands-Free Car Kit
USER'S MANUAL
Copyright © IAT101
webpage:
www.iat101.com www.ia-tecs.com
1
Advertisement
Summary of Contents for IA Technologies IAT- Car DVR 1
- Page 1 Car Driving Recorder Copyright This publication contains information that is protected by IAT- Car DVR 1 copyright. No part of it may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without permission from the copyright holders.
-
Page 2: Table Of Contents
Table of Contents Checking the Packing List Checking the packing list Features 25cm Specification Identifying Parts Installation 5.5cm Operation -DVR -Booth Tooth GPS, G-sensor LED status indicator 4 m (13 ft) long cable 2.7 m (9 ft) long cable Troubleshooting 10. -
Page 3: Features
Features: Specification: 1. Built-in 2.4” TFT LCD monitor, which can play video files. 300 mm Wide-angle rear view mirror 2. Built-in wide angle camera (140 degree diagonal). 3. As Vehicle engine starts; automatically loop recording. Operating voltage DC 12V 4. Easy installation Rear view mirror.. Installation Don’t remove the original rearview mirror, just 5. -
Page 4: Identifying Parts
Bluetooth hand-free 1. Power cord (with LED indicator) Bluetooth Version: V1.2, class 2 (QDID: B014086) 2. 300mm anti-glare mirror Effective distance: 10 m 3. LCD monitor switch Pairing: up to 7 slaves 4. Function key #1 Forms of support: Headset and hand-free 5. -
Page 5: Installation
Installation 1. As shown in Figure 1, fix this product on the original rear view mirror.. Figure 1 2. As shown in Figure 2, adjust the position of this product, so that the original car rearview mirror would not block the lens of this product. Figure 2 3. -
Page 6: Operation
Operation Step 1. Plug the power connector into the cigarette lighter to start the car (Red LED and Green LED always on) Select 2. Date and Time by , press into Step 2. Insert SD card into dvr Step 3. Turn on LCD monitor (this step can be skipped) Press to select the field, is adjusted figures, Press... - Page 7 pressing , press to confirm, then back to main menu. Sensitivity Select 6. Sensitivity by , press into it, adjust the sensitivity by pressing , press to confirm, then back to main menu. Exit Select 7. Exit by , press to confirm, the screen will back into the preview or recording mode directly.
- Page 8 Bluetooth Hands-free Car Kit Operation Bluetooth device. (Cell phone Bluetooth function must be turned on before that.) It's dangerous and illegal to hold a mobile phone during drive, the integrated Manual Connection Bluetooth car kits will provide a safe and convenient solution as you driving Power On/ Off Because of distance or other factors caused the automatic connection could not Car starts, then hands-free go into standby mode, status LED flashes once every...
- Page 9 GPS, G-sensor Installation card into its slot. Put the GPS on the top right of car windshield, as Figure 4. 3. Enter preview mode and stop recording. 4. Inadequate capacity of SD card. 5. SD card incompatible. Flashing Green 1. Recording in progress. Affix GPS to the windshield.
-
Page 10: Troubleshooting
Troubleshooting Warning 1. NEVER remove SD card whenever DVR-627 is recording or playing otherwise the file will be damaged. 1. If the LCD monitor appears , please insert the SD card into the SD slot. 2. If SD card inadvertently removed during recording and playback, the system will first deal to stop recording or playback process that may take a long time to restore normal key operation.