Advertisement
SETUP & OPERATION
NOTE: The Batteries have been preinstalled at the factory and the keypad is ready to
use.
OPEN SAFE WITH FACTORY PRESET PASS CODE
1.
Using the digital keypad enter the factory preset pass code " 1 - 5 - 9 - # ".
2.
Rotate handle clockwise and open door.
PROGRAM A NEW PASS CODE
1.
With door open, press red reset button inside door
(Fig. 1).
2.
Yellow light is on; enter new pass code in 30
seconds.
3.
Enter new code (3 to 8 digits) followed by " # ".
4.
Safe will beep and yellow light will turn off.
5.
Do not close door before testing new pass code.
TEST NEW PASS CODE
1.
With door open, rotate handle counterclockwise to put door bolts in lock
position.
2.
Enter new code (3 to 8 digits) followed by " # ".
3.
Green light is on; rotate handle clockwise within 5 seconds.
4.
Lock bolts should recede into the unlocked position.
TO CLOSE THE SAFE
1.
Make sure the lock bolts are in the unlocked position
2.
Close the door and hold it in the closed position.
3.
Rotate handle counterclockwise to engage the bolts and lock safe.
SECURE LOCKOUT PERIODS
If a wrong code is entered three times in a row, the digital keypad will begin a 20
second secure lockout period. During this secure lockout period the keypad will
become disabled.
Once the lockout period has expired, the safe can be unlocked using the correct pass
code.
OVERRIDE ACCESS KEY
Your safe if equipped with an emergency key lock, which allows immediate access in
case you forget your Pass code or the batteries need replacing.
1. Remove the key lock cover located beneath the keypad.
2. Insert one of the override keys (2 included) into the bypass lock and turn to the
left.
3. Rotate the spindle handle clockwise to the right, and then pull the door open.
4. After re-programming or changing batteries, replace the key lock cover and store
keys in a safe and secure location away from the safe.
IMPORTANT: The override key is used to gain access to the safe to change batteries
or if the digital lock fails to operate. This key should be stored in a secure place away
from your safe.
2
REPLACING BATTERIES
NOTE: The pass code will not be erased if the batteries become weak or are
removed.
The red light will come on if your batteries become week. If your batteries
are dead and you cannot open the safe by using the digital keypad, you must
use the override access key to open safe and access the battery
compartment.
1. Remove battery compartment cover on inside door.
2. Insert 4 "AA" batteries. DO NOT USE Non-alkaline or rechargeable
batteries
3. Replace the battery cover.
4. Do not close door before testing digital lock.
IF YOU FORGET THE PASSCODE
Use the override access key to open safe and program a new pass code.
ORDERING REPLACEMENT KEYS
The following information is required to order keys:
SALES RECEIPT & IDENTIFICATION
Copy of sales receipt showing Store, Date & Product Description.
Copy of your picture I.D. (Drivers license, passport, regular I.D.).
PRODUCT OWNERSHIP VERIFICATION FORM
Contact us by email or telephone to request a "Product Ownership
Verification Form".
CONTACT INFORMATION
INFORMATION
Name & Shipping Address
E-mail address (If Available)
Telephone Number
Best Time to Contact You
PAYMENT INFORMATION
Per Key: US/Canada - $12.00 (USD)
MasterCard
Express Delivery: Contact us for Charges
Order Subject to change without prior notification.
PRODUCT
Safe Model #
Safe Serial #
Lock Key #
Quantity of Keys Ordered
METHOD OF PAYMENT
Telephone: Visa or
Mail: Check or Money
3
Advertisement
