System Connection - Kenwood DNN991HD Quick Start Manual

Ñ System connection
Accessory -:
Bluetooth Microphone
FM/AM antenna input
Accessory ~
Green/Red
Green/White
HDMI/MHL
MIC AV-IN/OUT
AV-OUT
AUDIO
EXT
I/F
R L
AV-OUT Output
- Audio Output
AV-OUT Output
- Visual Output
AV-IN1 input
- Yellow (Visual input)
- Red (Audio Right input)
- White (Audio Left input)
Rear view camera input
Front view camera input
To CMOS-3xx series (Optional
Accessory) camera control
terminal
Accessory 9:
GPS Antenna
M4 x 8mmMAX
GPS
iDalalink
iPod/
I/F
AV-IN2
PTT
POWER
Fuse (10A)
Cooling fan
Accessory 2
Light Green (Parking sensor wire)
PRK SW
For best safety, be sure to connect
the parking sensor.
Purple/White (Reverse sensor wire)
REVERSE
Connect to vehicle's reverse lamp harness
when using the optional rear view camera.
Blue/Red
RELAY
To Relay Box
If no connections are made,
do not let the cable come out from the tab.
Accessory =: Push-To-Talk Switch
(DNN991HD only)
WI-FI receiver
- Reception may drop if there
are metal objects near the
WiFi
Bluetooth antenna and WI-FI
Receiver
receiver.
5V=500mA
- Install the WI-FI receiver
besides the place enclosed by
the metal.
Connect to the vehicle's
parking brake detection
switch harness.
English ñ
25