Advertisement
OPERATION INSTRUCTIONS OF CONTROL PANEL
To Activate the Kneading Discs only
1. Place the lower section of your legs into the fabric-covered slots.
2. Press the
3. Press the button again, and the mode will switch to 'II' (rhythmic squeeze 2).
4. Press the button again, and the mode will switch to 'III' (continuous squeeze).
5. Press
to start infrared heating function, to get the heat treatment effect.
6. Press the
button on the control panel anytime to terminate the kneading process.
Caution
Do not stand on, or exert excessive pressure on the massager. This may
•
significantly slow down or stop the motor, potentially causing overheating or
subsequent damage to the massager.
The total recommended usage time of the massager is 15 minutes.
•
Press the "stop" button to terminate the massager if discomfort is experienced. The
•
4 pairs of discs will not stop instantly, as they will continue to complete the last
kneading cycle before returning to their "home" position.
Some users may experience itchiness on their feet during and after the massage.
•
This is normal and is a result of improved blood circulation.
Safety
Do not use the massager in an excessively humid environment such as the
•
bathroom.
Do not use the massager on a wet body. This may result in a short circuit or an
•
electric shock.
(kneading) button and the default mode will be 'I' (rhythmic squeeze).
button again to stop the kneading process, or press the
(stop)
Advertisement
