Advertisement
08
FEATURES/SYSTEM CONFIGURATIONS
Integration into the studio
A cost-effective studio solution
Multicore CCU operation with CCU-D50
In addition to enabling connection with portable VTRs, the 26-pin connector
which is standard on the DSR-570WS and DSR-390 allows remote control
from a Sony CCU-D50 Multicore Camera Control Unit. This affordable unit
provides sophisticated remote controls for EFP or studio operators, and can
be used for a wide range of applications.
Maximum 300 m control distance between the DSR-570WS/390
and the CCU-D50 via a Sony CCZ-A 26-pin cable
Maximum 150 m of return video and genlock signal transmissions
Analog Y/R-Y/B-Y and VBS signals transferred to and output
from the CCU-D50
Control functions via the CCU-D50:
IRIS (auto/manual), White/Black Balance (auto/manual/preset), Gain
Select (low/mid/high), R/B White, R/B Black, Master Black, Sub-carrier
Phase, Horizontal Phase, Output Mode (color bar/camera), Knee Point
(auto/manual), Detail Level, Tally/Intercom, Shutter Speed Selection,
Clear Scan, ATW (ON/OFF)
Video light power supplied from the CCU-D50
When using a video light such as in on-air interview applications, the
power for the video light can be supplied from the CCU-D50 via the
CCZ-A cable as follows:
• Maximum 20 W when using a 1.5-inch type viewfinder (DXF-801)
• Maximum 10 W when using a 5-inch type viewfinder (DXF-51)
CCU-D50
System configurations for studio applications
26-pin connector
Intercom adaptor CA-370*
The DSR-570WS and DSR-390 offer intercom capability with the addition
of an optional CA-370 Intercom adaptor, for communication between
the camera operator and CCU-D50 operator. The CA-370 also allows
connection of a Sony
DR-100 headset and
provides the associated
audio volume controls.
The convenient 'V-shoe
mount' provides quick
and stable connection
between the camcorder
and adaptor.
* The CA-370 cannot be used
in combination with the
CA-WR855.
Studio System with the CA-370 and DR-100
DSR-570WS/390 Features
Advertisement
