JVC AV-48P777/H Service Manual page 25

4.5.2.2 TV-MICRO SERVICE MODE
1. Adjust
SETTING ITEM No.
SETTING ITEM
S001 BRIGHT
NTSC 43Full
SIGNAL SYSTEM SCREEN MODE VIDEO STATUS
(1) SIGNAL SYSTEM
The signal displayed on the screen is displayed.
NTSC : 525i (Composite / S-video input)
525i : 525i (Component input)
525p : 525p (Component input)
750p : 750p (Component input)
1125i : 1125i (Component input)
D525i : ATSC 525i
D525p : ATSC 525p
D750p : ATSC 750p
D1125i : ATSC 1125i
H525i : HDMI 525i
H525pS1 : HDMI 525p size1
H525pS2 : HDMI 525p size2
H750p : HDMI 750p
H1125i : HDMI 1125i
(2) SCREEN MODE
State of the ASPECT is displayed.
43Full : FULL (Input signal 4 : 3)
43Pano : PANORAMA (Input signal 4 : 3)
43Cinema : CINEMA (Input signal 4 : 3)
43Regular : REGULAR (Input signal 4 : 3)
16Full : FULL (Input signal 16 : 9)
16Pano : PANORAMA ZOOM (Input signal 16 : 9)
16Cinema : CINEMA ZOOM (Input signal 16 : 9)
16Slim : SLIM (Input signal 16 : 9)
(3) VIDEO STATUS
State of the VIDEO STATUS is displayed.
STD : STANDARD
DYN : DYNAMIC
THEA : THEATER
GAME : GAME
(4) WHITE BALANCE
State of the WHITE BALANCE is displayed.
H : HIGH
L : LOW
SETTING VALUE (DATA)
064
DYN H
WHITE BALANCE
(5) SETTING ITEM NAME
Setting item name are displayed. For the setting item names
to be displayed, refer to "INITIAL SETTING VALUE OF
SERVICE MODE".
(6) SETTING ITEM NO.
Setting item numbers are displayed. The setting item numbers
to be displayed are listed below.
Item No.
S001 - S060 Video system setting
D001 - D071 Deflection system
F001 Factory system setting
SELECTION OF SETTING ITEM
• [CH+] / [CH-] key.
Change the setting items up/ down.
S001... ↔ D001... ↔ F001...↔ S001...
• [SLEEP TIMER] key.
Switch to the next items.
S001 → D001 → F001 → S001
(7) SETTING VALUE (DATA)
The SETTING VALUE is displayed.
CHANGE OF SETTING VALUE (DATA)
• [VOL+] / [VOL-] key.
Change the setting values up/down.
MEMORY OF SETTING VALUE (DATA)
Changed setting value is memorized by pressing
[MUTING] key.
Setting item
(No.YA455)1-25