Operating The Monitor - Philips Brilliance S231C4 User Manual

2. Setting up the monitor
Adjusting viewing angle
For optimal viewing, it is recommended to look
at the full face of the SMART All-in-One, then
adjust the SMART All-in-One's angle to your
own preference.
The SMART All-in-One's tilted angle is
adjustable from 12° to 57.5°.
12°
Note
Do not touch the LCD screen when you
adjust the angle. It may cause damage or
break the LCD screen.
Careful attention is required not to catch
your fingers or hands when you adjust the
angle.
It is recommended to stabilize with a fixed
point in order to lock the stand if the tilted
angle is equal to or over 12°.
Do not adjust the tilt angle less than 12°.
The monitor may fall caused by instability.
For displays with glossy bezels the user
should consider the placement of the
display as the bezel may cause disturbing
reflections from surrounding light and
bright surfaces.
57.5°

2.2 Operating the monitor

SMART All-in-One allows you to either use it
as a stand-alone SMART All-in-One in Android
system without any PC connection required, or
as a normal PC monitor when connecting with
PC.
Front control
8 7 6
6
11 10 9
4
5 3 2 1