Advertisement
Adjusting the Position of the Lens
The front lens can be adjusted upwards or downwards by up to 20 degrees to ensure that the camera
is pointing forwards through your windscreen.
Turning On and Turning Off
Turn On: Press and hold the power button once until you hear a beep and the screen illuminates.
Turn Off: Press and hold the power button once until you hear a beep and the screen says
"Goodbye" and then goes dark.
Note: When battery is low, the unit will prompt an automatic shutdown due to low battery.
BASIC OPERATIONS
Changing Operating Mode
This machine has two operating modes: record and playback.
Press the MODE button to change between them.
Setup Menu
Press the MENU button to enter the MENU page. The "Menu Setting" is in blue.
In the menu setting page, click the left and right keys to select the desired settings field, then click
OK to accept the settings, and press MENU to exit the menu.
System Setting: You can make system setting changes in the framing preview mode.
•
Video Mode: Double lens / Front Lens / Rear Lens
•
Time Setting: Press left and right for time adjustment. Press OK to confirm and exit.
•
Formatting: Press the OK button to enter and select Yes/No.
•
Video Format: NTSC/PAL format. (Australian televisions display PAL format by default.)
•
Voice: On/Off
•
Recording: On/Off
•
Language: English/German/Korean/Russian/Traditional Chinese/Simplified
•
Chinese/Japanese
Screen Preset: On/Off
•
Automatic Video Protection Sensitivity: Low/General/High/Automatically turn off video
•
protection function. (This function controls how sensitive the G-Sensor is)
Frequency: 50Hz/60Hz
•
How to Shoot
Start / Stop Shooting: When in shooting mode, press OK to start recording, then press OK again to
stop recording. When the travelling recorder is on or a memory card is inserted, unit will start to
record automatically.
Note: pressing the left arrow button during recording will mute and unmute the recording.
Video Playback and File Management
Press the MODE key to enter playback mode, and the screen should show an image of the last video
file. Press the LEFT and RIGHT buttons to select a different file to view.
Press the OK button to play and pause the video file.
Advertisement
