Remote Control Operation - Boss Audio Systems BV9372BI User Manual

Touch screen Calibration
Please follow the below instructions to calibrate when there is no touch or
touch is not accurate.
Step 1: Press the mode button in the unit to switch to DVD mode.
Step 2: Insert a DVD disc, after DVD is loaded, press the stop button "
picture (1). in the remote short, the unit will display as show in picture (2).
Picture ( 1 )
Step 3: Press " " in the remote as show in picture (3), the unit will display as show in
picture (4).
Picture ( 3 )
Step 4: Press " " button in the remote and then quickly press "
picture (5) and you will enter the touch calibration interface as show in picture (6).
Picture ( 5 )
Step 15: Use the touch pen to touch top left corner, top right corner, down right corner,
down left corner, when the cross cursor stop at each corner, touch the center of the
cursor. Then the panel will display OK and leave the calibration interface and the unit
regained touch as show in picture (7).
" as show in
Picture ( 2 )
Picture ( 4 )
" button as show in
Picture ( 6 )
Picture ( 7 )
15
28
POWER ON/OFF AMS / RPT
MUTE TITLE
SOURCE AUDIO
EQ GO TO
SEEK+ / SEEK- SUBTITLE
VOL+ / VOL- PBC
SEL UP / DOWN / L / R ENTER
LOUD SLOW
BAND / P / N ANGLE
LOC / RDM SETUP
STOP OSD
PLAY / PAUSE ZOOM
ST / PROG MENU
0-10+ DSP
1. POWER
Press once to switch on, press again to
switch off.
2. MUTE Button
Press once to turn off audio output,
press again to resume volume level.

Remote Control Operation

3. SOURCE Button
Press this button to change mode.
4. EQ Button
Press this button to choose POP、ROCK、
CLASSIC、EQ off.
5. SEEK+ ( ) / SEEK-( ) Button
In normal playback MP3、USB、SD songs,
Press this button to previous song or next
song.
6. VOL+ ( ) / VOL- ( )
Press this button to increase or decrease
volume level.
7. SEL Button
Press this button to choose sound feature.
8. LOUD Button
Press this button to startup LOUD function.
9. BAND-P/N Button
In radio mode, press this button to choose
band.
In VCD、DVD mode, press this button to
choose PAL 、 AUTO or NTSC system.
10. LOC / RDM Button
In radio mode, press this button to switch
between local and direction.
In VCD、CD mode, press this key to
randomly play.
11. STOP Button
Press this button to stop playing.
12. PLAY / PAUSE Button
Press this button to switch between play
and pause.
In stop mode, press this button to play.
13. ST / PROG Button
In radio mode, press this button to choose
stereo or mono station.
In audio mode, it can help STOP button to
programmed play.
04