Specifications - Oppo HA-1 User Manual

Specifications

Designs and specifications are subject to change without notice.
General
Dimensions (W x H x D)
Mass
Power Supply
Power Consumption
Trigger Input
Trigger Output
Operating Temperature
Operating Humidity
Recommended Headphone Impedance
Balanced Headphone Jack Output (XLR-4) Pin order
6.35 mm Headphone Jack Output Pin order
XLR Balanced Audio Input
Input Impedance
Maximum Input Level
RCA Stereo Audio Input
Input Impedance
Maximum Input Level
Coaxial, Optical, AES/EBU Digital Inputs
Input Format
Sampling Frequencies
Word Length
USB DAC Audio Input (USB B Type)
Input Format
PCM Sampling Frequencies
PCM Word Length
DSD Sampling Frequencies
Profile
Mobile USB Audio Input (USB A Type)
Input Format
PCM Sampling Frequencies
Profile
VBUS Power Output
Bluetooth Audio Input
Standard
Profile
Audio Transmission Format
24
10.0 x 4.8 x 12.2 inches, 254 x 80 x 333 mm
13.0 lbs, 5.9 kg
AC 110-120 V~ / 220-240 V~, 50/60 Hz auto-sensing
70 W (operation), 0.5 W (standby)
3.5 V – 15 V, 10 mA minimum
12 V, 100 mA maximum
41 F - 95 F, 5 C - 35 C
15% - 75% No condensation
32 ohm – 600 ohm
1: L+, 2: L-, 3: R+, 4: R-, Shell: GND
Tip: L, Ring: R, Sleeve: GND
15k ohm
18 Vrms, +27.3 dBu (0 dBu = 0.775 Vrms)
10k ohm
9 Vrms, +21.3 dBu (0 dBu = 0.775 Vrms)
Stereo PCM
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz
16-bit, 24-bit
Stereo PCM, Stereo DSD (DoP v1.1 or native)
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz
16-bit, 24-bit, 32-bit
2.8224 MHz (DSD64), 5.6448 MHz (DSD128),
11.2896 MHz (DSD256, native mode only)
USB 2.0, USB Audio 2.0
Stereo PCM
44.1 kHz, 48 kHz
USB 2.0, USB Audio 2.0
+5 V, 2.1 A
Bluetooth 2.1+EDR
iAP, SPP, AVRCP, A2DP
SBC, aptX