Hoover Lightweight Commercial Cleaner Operating Instructions Manual
Hoover Lightweight Commercial Cleaner Operating Instructions Manual

Hoover Lightweight Commercial Cleaner Operating Instructions Manual

Hoover lightweight commercial cleaner operating instructions

Advertisement

Quick Links

Lightweight
Commercial
Cleaner
Read these
instructions before
operating cleaner
Index
Assembling Cleaner ..........................2-5
How To Use ........................................5-6
If You Have a Problem ..........................8
Important Safeguards ..........................1
Lubrication ............................................8
Authorized Service............................9
Replacing Agitator ............................8
Replacing Belt ................................7-8
Replacing Filter Bag ......................6-7
Unpacking Cleaner ..............................2
DOUBLE INSULATED: When servic-
ing, use only identical replacement
parts.
This cleaner meets Occupational
Safety and health Act (OSHA-29 CFR
1910 Subpart S) requirements.
© 2004 The Hoover Company

Operating Instructions

ENGLISH
ESPAÑOL
FRANÇAIS
Record and retain
Model Number_______________________
Serial Number_______________________
(Located on bottom of cleaner as shown)

Important Safeguards

When using an electrical appliance, always follow
basic precautions, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
Warning:
• Do not use outdoors or on wet surfaces.
• This appliance is provided with double insulation. Use only identical replacement
parts. See instructions for servicing double insulated appliances.
• Close supervision is necessary when any appliance is used by or near children.
Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.
• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,
rotating agitator and other moving parts. Do not operate cleaner in bare feet or
when wearing open toe shoes or sandals.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or
hot ashes.
• Do not use to pick up flammable or combustible liquids such as gasoline or fine
wood sandings or use in areas where they may be present.
• Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner
and the bag.
• Do not use without dust bag or filters in place. Change bag frequently when picking
up very fine materials such as powder.
• Use extra care when cleaning on stairs.
• Do not put any object into openings. Do not use with any opening blocked; keep
free of dust, lint, hair, or anything that may reduce air flow.
• Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord
around sharp edges or corners. Do not run appliance over cord. Keep cord away
from heated surfaces.
• Always disconnect cord from electrical outlet before servicing the cleaner.
• Unplug cleaner when not in use. Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never
handle plug or appliance with wet hands.
• The use of an extension cord is not recommended.
• Do not use with damaged cord or plug. If appliance is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover
Factory Service Center or Authorized Hoover Commercial Warranty Service
Distributor.
• Use vacuum cleaner only for its intended use as described in the instructions.
Use only attachments recommended by The Hoover Company; others may cause
hazards.

Save these instructions!

pp.1-9
pág 10-14
p. 15-20
To reduce the risk of fire, electric shock, or injury:
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lightweight Commercial Cleaner and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hoover Lightweight Commercial Cleaner

  • Page 1: Table Of Contents

    • Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Factory Service Center or Authorized Hoover Commercial Warranty Service Distributor.
  • Page 2: Assembling Cleaner

    Assembling cleaner It is extremely important to read and follow all instruction steps in order. The assembled cleaner will look like this drawing. STEP 1 Unpack carton Remove all parts from carton and identify each item shown. Make sure all parts, especially small items, such as G and H, are located before disposing of cardboard packing.
  • Page 3: Step 2 Assemble Handle

    STEP 2 Assemble handle Align upper handle and lower handle as shown. Place upper (B) and lower (C) handle parts on a flat surface, aligning rod sections (D). With hand on sides of handle, push parts together firmly until they “click”...
  • Page 4 STEP 4 Attach cloth outer bag Note location of tapered rails (A) on back of outer bag base (B) and on front of lower handle (C). Note round opening (F) and hooks (G) on back of outer bag (H). Place opening over dirt tube (I). Unzip outer bag and place hand inside.
  • Page 5: Handle Positions

    STEP 6 Attach filter bag Hold filter bag collar (A) as shown. Align opening in filter bag with dirt tube (B) inside the outer bag. Push bag collar firmly onto dirt tube. Tuck in filter bag; zip outer bag. How to use Cleaner description Plug cord into electrical outlet.
  • Page 6: Carpet Height Adjustment

    Where to buy Filter bags may be purchased from your local Authorized Hoover Dealer (Depot), leading retailers, or from a Hoover Fac- tory Service Center. If it is necessary to raise and lower the nozzle for various car- pet pile heights, slide the nozzle con- trol knob to the desired setting.
  • Page 7: Replacing Belt

    How to replace Disconnect cleaner from electrical outlet. To change filter bag, unzip outer bag, grasp sides of filter bag collar (A) and pull collar from tube. Note: Do not clean out old filter bag and reuse. Discard used filter bag. The belt The belt on your cleaner causes the agitator to rotate and is important for...
  • Page 8: If You Have A Problem

    The addition of lubricant could cause damage. Therefore, do not add lubricant to motor bearings. The agitator is equipped with two ball bearings that should be lubricat- ed periodically by a Hoover Factory Service Center or an Authorized Hoover Warranty Service Dealer.
  • Page 9: Servicing Of Doubleinsulated Appliances

    (U.S. only). Please do not send your cleaner to The Hoover Company in North Can- ton for service, this will only result in delay. If further assistance is needed, con- tact The Hoover Consumer Response Center, Phone: 1-330- 499-9499.

Table of Contents