Sony KDP-51WS550 Service Manual page 261

z
If 4:3 Default is set to
anything but Off, the Wide Mode
setting changes only for the
current channel. When you
change channels (or inputs),
Wide Mode is automatically
replaced with the 4:3 Default
setting. To retain the current
Wide Mode setting as channels
and inputs are changed, set 4:3
Default to Off.
Option Description
4:3 Default Wide Zoom
Select the default
Screen Mode to
use for 4:3 sources
Normal
Full
Zoom
Off
Vertical Center Allows you to move the position of the picture up and
down in the window. (Available only in Wide Zoom and
Zoom modes.)
Move the joystick
correction between +15 and -15 (Zoom mode), and +10
and -10 (Wide Zoom mode).
Select to enlarge the 4:3 size picture, while
the upper and lower parts of the picture are
condensed to fit the wide screen.
Select to return the 4:3 picture to normal
mode.
Select to enlarge the 4:3 picture
horizontally only, to fill the wide screen.
Select to enlarge the 4:3 picture
horizontally and vertically to an equal
aspect ratio that fills the wide screen.
Select to continue using the current Wide
Mode setting when the channel or input is
changed.
V v
or and press to choose a
97