Using The Audio Setup Menu; Using The Rating Setup Menu - Toshiba SD7300KU Owner's Manual

Function setup
Customizing the Function Settings (continued)
V deo
The video output of the DVD player can be selected as
Component, P-Scan or HDMI.
Component: Select if you connect the DVD player to your
TV which has component video inputs.
P-Scan: Select if you connect the DVD player to your
TV which has component video inputs that
support progressive scan.
HDMI: High Defi nition Multimedia Interface. Select if
you connect the DVD player to TV via HDMI
input.
Note
For the HDMI output, please connect the unit to your TV
via HDMI cable 14 .
HDMI Res (Resolut on)
You can set the HDMI Res. (Resolution) to be Auto, 480p,
720p, 1080i or 1080p according to the connected TV.
Notes
• Select the HDMI resolution according to the performance
of the connected TV.
• If the Video out is not set to "HDMI", you cannot select
the "HDMI Res.".
JPE Interval
To set the JPEG Interval for slide show playback. Select
"Off" to disable the slide show feature.
5 seconds: Plays back images in the form of a slide show
at 5 seconds interval.
10 seconds: Plays back images in the form of a slide show
at 10 seconds interval.
15 seconds: Plays back images in the form of a slide show
at 15 seconds interval.
Us ng the Aud o setup menu
1. Press SETUP during stop.
2. Press button to select Aud o.
3. Press / button to select the setting item: Digital out
or Night Mode.
4. Press button, then use
setting choice on the right.
5. Press ENTER button.
6. Press SETUP button to exit the menu.
22
Selects the output sound format corresponding to your
system connection.
Off:
Raw: Disc audio raw data will be output. Select "Raw" if
PCM: Select when connected to a Multi-channel digital
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialog even in very low volume.
Note
Night mode is Dynamic Range Control (DRC) option for
analog audio output.
1. Press SETUP during stop.
2.
3. Press
/ button to select the
Press
ENTER button.
D g tal out
To disable Digital out.
your amplifi er supports "DTS".
stereo amplifi er. The DVD player outputs sound in the
PCM stereo format when you play a DVD recorded
on the Dolby Digital, MPEG1 or MPEG2 recording
system.
N ght Mode
DVD
Us ng the Rat ng setup menu
Press button to select Rat ng.
/ button to select the setting option: Password or
Rating.
Password
DVD
/ button to select the Password option, then press
button . Enter your 4-digit security code and then press the
If you forget the password, you can erase your current
password by press ng number button 8 on the remote
control four t mes, then press ENTER button to confi rm
the sett ng (PASSWORD 8888)
The Parental lock
is active.
The Parental lock is
NOT active.