Akai AM-2200 Service Manual page 12

1. This parts list is compiled by various individual blocks based on assembly process.
2. When ordering parts, please describe parts number, serial number, and model number in detail.
3. How to read list.
The reference number corresponds with illustration or photo number of that particular
parts list.
This number corresponds with the Figure Number.
12-115x
Ref. No. Parts No.
FLYWHEEL BLOCK #13
1 2 - l l 5 x 800425 Flywheel Block Assy. Comp.
1 2 - 1 1 6 244506 Flywheel Only
1 2 - 1 1 7 x 244754 Felt, Flywheel
1 2 - 1 1 8 251324 Main Metal Case
12-119 253080 Main Metal
4. The symbol numbers shown on the P.C. Board list can be matched with the Composite Views
of components of the Schematic Diagram or Service Manual.
5. The indications of Resistors and Capacitors in the photos of P.C. Board are being eliminated.
6. The shape of the parts and parts name, etc. can be confirmed by comparing them with the parts
shown on the Electrical Parts Table of P.C. Board.
7. Both the kind of part and installation position can be determined by the Parts Number. To
determine where a parts number is listed, utilize Parts Index at end of Parts List.
It is necessary first of all to find the Parts Number. This can be accomplished by using the
Reference Number listed at right of parts number in the Parts Index, (meaning of ref. no.
outlined in Item 3 above).
8. Utilize separate "Price List for Parts" to determine unit price. The most simple method of
finding parts Price is to utilize the reference number.
CAUTION:
1. When placing an order for parts, be sure to list the parts no. model no., and description. There
are instances in which if any of this information is omitted, parts cannot be shipped or the
wrong parts will be delivered.
2. Please be careful not to make a mistake in the parts no. If the parts no. is in error, a part dif-
ferent from the one ordered may be delivered.
HOW TO USE THIS PARTS LIST
This number corresponds with the individual parts index number
in that figure.
A small "x indicates the inability to show that particular part
in the Photo or Illustration.
Description Schematic
RDG#13
RD 233
RD275
RD 236
RD237
Schematic Diagram Number of individual
manufactured part.
(not required for parts order)
Quantity of particular part required.
No Q'ty