Wall Mounting - U.S. Sunlight Ventilator Installation And Mounting Manual

Wall mounting:

Brackets are included to mount the panel to a wall if preferred.
First, assemble the braces to the brackets as follows:
Step 1.
Attach the brace to each bracket with the cross brace bolt and nut (E.) (fig. 32)
Step 2.
Attach the brackets to the panel using the 4 bolts (F.) (fig. 33)
Step 3.
Depending on the material your wall is made of, mount the assembly to the wall using appropriate fasteners
(see "Optional Hardware" on page 1 for details).
(fig. 34 and 35)
fig. 32
Connecting the panel to the fan:
Step 1.
Once the panel and fan are mounted, route the wire from the panel to the fan, attaching the wire to the building
appropriately. We suggest using romex mounting clips or coaxial staple for either wood or masonry available at your
local hardware store or home builder supply
Step 2.
Typically the wire will route through an opening in the vent or an unused louver. (fig. 37)
Step 3.
Connect the wires to the fan, matching the red wire to the red connector and the black to the black connector on
the motor. (fig. 38)
Step 4.
Include a drip curve if possible when securing to the wall to prevent water running down the wire and into the attic
or crawl space. (fig. 39)
fig. 36
see Optional
Hardware on
bolt F
page 1
fig. 33
. (fig. 36)
fig. 37
page 6
fig. 34
fig. 38
fig. 35
fig. 39