Base Assembly Sled; Gear Feed; Gear Middle; Gear Rack - LG HT303PD Service Manual

RUBBER DAMPER
3. Base Assembly Sled (Fig. 4-3)
1) Release 4 Screw(S2).
2) Disconnect the FFC Connector(C1)

3-1. Gear Feed

3-2. Gear Middle

LGE Internal Use Only
GENERAL PICK UP ASSEMBLY

GEAR RACK

SPINDLE MOTOR ASSEMBLY
RUBBER DAMPER
Distinguish upper and
lower sides
(Assemble with care)
(S2)
RUBBER DAMPER
Fig. 4-3
3-3. Gear Rack
1) Release the Scerw(S3)
4. Rubber Rear (Fig. 4-3)
4-4 Copyright © 2009 LG Electronics. Inc. All right reserved.
RUBBER DAMPER
Distinguish upper and
lower sides
(Assemble with care)
BASE PU
(S2)
Only for training and service purposes