Only For Training And Service Purposes - LG GC900F Service Manual

- Freely programable pulse charging to reduce the thermal power dissipation in the constant voltage
charging phase
- Top-off charge current sensing SM-POWER completes the USB interface of S-GOLD
- Regulated voltage for S-GOLD USB interface including reverse current and overvoltage protection
- Switch to supply USB pull-up resistor
- Mini-host pull down resistor functionality
- Charge pump with internal switching capacitor for USB host VBUS supply voltage SM-POWER fully
supports LED and Vibra Motor functionality
- no external components needed
- driver for backlight LEDs adjustable in steps up to 140mA and with soft turn on and off by PWM
dimming
- two driver outputs for single LEDs for precharge indication and signaling with i.e. change of colour
- driver for Vibra Motor with adjustable voltages, soft startup / shutdown and current limitation
SMPOWER
offers several control functions
- Power-on Reset Generator with logic state machine
- I2C bus interface
- I2C bus configurable mode control logic with ON (push-button or RTC), VCXOEN and LRF3EN
(wake-up by Bluetooth) inputs
- Programable interrupt channels to handle peripherals like SIM, MMC and USB
- Monitoring of charging functions
- Undervoltage Shut-Down
- Errorflags (volatile or non-volatile) from many power-supply functions and thermal sensor in order to
debug system
- Overtemperature Shut-Down
- Overtemperature Warning
- Support of S-GOLD standby power-down concept
- Support of S-GOLD Power-Down Pad Tristate Function
Copyright © 2009 LG Electronics. Inc. All right reserved.

Only for training and service purposes

3. BB Circuit Technical brief
GC900 service manual
- 33 - LGE Internal Use Only