How To Move The Chassis Into Service Position - Panasonic TX-29AS10P Service Manual

HOW TO MOVE THE CHASSIS INTO SERVICE POSITION

1. Remove 2 screws (A), as shown in Fig.4., and remove speaker assembly.
2. Hold and lift the rear of the chassis and gently pull the chassis toward you, as shown in
3. Release the respective wiring clips and move the EHT lead around to the left side of the CRT neck.
4. Elevate the chassis as shown in
5. Using a speaker screw, screw the chassis frame into the top speaker fixing rib (B), as shown in Fig.6.
6. After servicing replace the speaker, and ensure all wiring is returned to its original position before returning the receiver
to the customer.
(A)
Fig .6.
Fig. 4.
(B)
Fig. 6.
4
Fig.5.
Fig. 5.