HB Opto HBP200 User Manual page 46

Dlp pico projector
Table of Contents

Advertisement

HBP200
10. When the battery emits any abnormal smell, please stop using it and contact your dealer. Do not repair the battery by yourself.
11. When the battery emits any liquid, do not touch the liquid directly by your hands. Contact your dealer and do not repair the
battery by yourself. If the liquid happens to contact your eyes or skin, do not rob your eyes or skin but rinse them with clean
water immediately, and then go to the hospital for further treatments.
<Charging>
12. When you charge the battery, do not place it in the environment described above in the instruction no. 6. Otherwise, it will cause
the battery to be out of function.
13. Please charge the battery by following the steps in the section below. Please stop charging when you see the LED indicator turn
green. Do not overcharge the battery, or it will cause the battery to be out of function.
14. When the battery is not going to be used for a long period, keep the battery in 50% charged status. We recommend to charge
the battery up to 50% of the total capacity every 3 months and maintain the voltage 10.8~11.0V.
DLP Pico Projector User Guide
43

Advertisement

Table of Contents
loading

Related Products for HB Opto HBP200

Table of Contents