Cowon SP2 User Manual
  1. Manuals
  2. Brands
  3. Cowon Manuals
  4. Speakers
  5. SP2
  6. User manual
Cowon SP2 User Manual

Cowon SP2 User Manual

Wireless bluetooth stereo speaker
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Guide
ver. 1.0 W
v

Advertisement

Table of Contents
loading

Summary of Contents for Cowon SP2

  • Page 1 User Guide ver. 1.0 W...

  • Page 2: Copyright Notice

    + All the other product(s) and service(s) listed in this manual are registered trademark and service of the corresponding copyright owner(s). + All rights to this program are reserved by COWON SYSTEMS Inc. and protected under copyright law. + This manual is based on the specifications of the product available at the point of publishing it.

  • Page 3: Bluetooth Wireless Communication Technology

    Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among mobile phones, computers, printers, PDAs and other devices. The max transmission range of class II is 10 meters while the max transmission ranges of class I can reach up to 100 meters. COWON SP2...

  • Page 4: Product Overview

    ■ AVRCP : Audio / Video Remote Control Profile + Easy to switch between the call and music, you will not miss any incoming calls while listening to music. + Every time when SP2 is turned on, it will connect to a last connected device automatically. COWON SP2...

  • Page 5: Table Of Contents

    + Names of Parts and Functions Volume Up(+) Microphone Previous Song / LED Status Indicator Fast Rewind Play / Pause, ON / OFF Button : Pairing Power Switch Volume Down(-) AUX-IN Port Next Song / USB Port Fast Forward NFC Sensor USB Cable COWON SP2...
  • Page 6 - COWON SP2 can also be charged by a Micro USB smart phone charger. - For normal charge, please turn off SP2. - When charging SP2 for the first time or if SP2 has not been charged for an extended time, fully charge the battery before use.
  • Page 7 2. Activate Bluetooth function. 3. Touch More settings interface to activate NFC function. 4. Please turn on SP2 first. Keep the NFC chip of a mobile phone and the speaker within 1 centimeter. 5. SP2 will enter pairing mode automatically. There will be a request from the mobile phone 'Pair the Bluetooth device COWON SP2?' with prompt tone.
  • Page 8 - The screen of a mobile phone must be in unlocked mode during pairing via NFC. - The NFC chip of a mobile phone and SP2 must be in 1 centimeter during pairing. - The pairing procedures are subject to different models of mobile phones.

  • Page 9: Volume Up

    4 seconds. - Keep SP2 and a Bluetooth transmitter within 1 meter when pairing - The pairing password of SP2 is '0000' . The speaker can only pair with a Bluetooth transmitter whose pairing password is '0000' . - If pairing still fails after several tries, please refer to the Bluetooth transmitter’...
  • Page 10 - When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to SP2 by using the conversation switch button or through operating on the mobile phone.

  • Page 11: Previous Song

    AUX-IN port of SP2 - When playing music on some mobile phones, the music will be transmitted to the mobile phone’ s speaker instead of SP2. You have to select 'transmit the sound via Bluetooth' in the settings menu and choose 'COWON SP2' as a speaker device.

  • Page 12: Led Status Indicator

    SP2 supports USB data transmission function. You can use SP2 as a PC speaker via USB cable. 1. Turn on SP2 and connect it to a PC using a USB cable. 2. 'Installation Device Driver Software' window pops up on the PC screen.

  • Page 13: Specifications

    1 minutes + Factory Reset (Initialization) In the status of standby mode, when SP2 is not connected with a Bluetooth device, press ▶ll and volume up '+' buttons long simultaneously about 5 seconds and release them when red and blue LEDs flash simultaneously, you will hear two 'du du' tones.

  • Page 14: Troubleshooting

    Please make sure the charging device connects with SP2 well. If you did not use SP2 for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes. The red LED will be on.
  • Page 15 * Please retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty service. And in order to expedite the repair process, COWON recommends you to complete the below form at the time of purchase and present it to our repair center with the receipt.

  • Page 16: Warranty Coverage

    If a defect arises and a valid claim is received by COWON within the Warranty Period, at its option, COWON will repair or replace the product without charge, using new or refurbished replacement parts.

Table of Contents