Please pay attention to the Regulations and Warnings Section of this User Guide before setting up the security monitor. Failure to do so may inadvertently result in personal injuries or machine damage. Mace® LED CCTV Security Surveillance Monitors...
63.981 60.020 1280 × 1024 @ 75 Hz 79.976 75.025 Note: The timings with presets are recommended. Adjustments to the timing need to be made manually if they are not included in this list. Mace® LED CCTV Security Surveillance Monitors...
Phase for an optimal image in PC mode only Toggle the display between Standby mode and On/Off Power (Press “Power” and wait for 6 seconds) LED Status Power State LED Color Display Green Standby No Power None (Off) Mace® LED CCTV Security Surveillance Monitors...
Note: VGA Mode: Contrast, Brightness, Color Temp., Auto Adjust. OSD Menu: Sound Mode Press � ◄ or + ► to adjust volume level Volume Press � ◄ or + ► to select sound Mute Off | On Mace® LED CCTV Security Surveillance Monitors...
Phase Adjust the V-size of the display picture Press � ◄ or + ► to adjust Scale Mode Full | 16:9 Reset Recall Default value Note: “Clock” and “Phase” setting in VGA Mode only Mace® LED CCTV Security Surveillance Monitors...
Page 8
1. AV1 and AV2 , HDMI and VGA cannot be displayed at the same time on the monitor in PIP / POP mode. 2. If POP mode is selected both images are scaled to fit the screen. Mace® LED CCTV Security Surveillance Monitors...
6. Keep the LED monitor away from sharp objects. WARNING: Any unauthorized modification to this equipment could result in the revocation of the authorization to operate the equipment and void the product warranty. Mace® LED CCTV Security Surveillance Monitors...
• Ensure that the audio cable is connected to the line out on the audio card and the line-in on the monitor. • Inspect the audio cable for any apparent damage. Double check by switching to another audio cable to see if the audio works. Mace® LED CCTV Security Surveillance Monitors...
— Do not apply pressure to the screen. The LED surface is delicate. ► Power — Use the type of power indicated on the marking label. Mace® LED CCTV Security Surveillance Monitors...
Page 12
— Place the monitor on a flat and level surface. — Place the monitor in a well-ventilated place. — Keep the monitor away from: Extremely hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment that generate strong magnetic fields. Mace® LED CCTV Security Surveillance Monitors...
Page 13
5101 NW 21st Ave, Suite 210 • Fort Lauderdale, FL 33309 www.mace.com • (877) 585-6223...