Page 2
Thank you for your purchase of the SircleBind CW-4500 electric 3:1 wire and plastic comb binding machine. Sheet Measuring Guide Wire Comb Diame- ter Guide Waste Tray Plastic Comb Mar- gin Guide Wire Comb Margin Guide Plastic Comb Open- ing Lever...
Page 3
General Precautions (Continued): 3. Keep fingers away from the punching throat to avoid injury. 4. Empty waste tray frequently for best results. 5. Ensure that the rating plate on the machine is appropri- ate for your electricity supply. Asssembly (See Fig. 1.1): 1.
Page 4
Punch (Continued): 4. Move punch switch to the left. (See Fig. 2.3) 5. Removed punched document. Fig. 2.3 Bind: 1. Select the plastic comb most suitable for your document size. Use the plastic comb measuring guide or the fol- lowing table to assist you in your selection. Diameter Max # of 25 45...
Page 5
3:1 Wire Punch: 1. Lift the support tray up. 2. Use the paper margin guide to properly align papers. Tip: To ensure proper alignment, use a piece of scrap paper to test the punch and adjust if necessary. (See Fig. 4.1) 3.
Page 6
Emptying the Trash (See Fig. 6.1): 1. If you hear an alarm, it is necessary to empty the ma- chine. Note: The machine will not function unless the bin is emptied. 2. Slide the waste tray out of the unit. 3.
Need help?
Do you have a question about the SircleBind CW-4500 and is the answer not in the manual?
Questions and answers