4-1-12 Network Error
Cable connection
between Set & LAN ok?
Check Network connection
Test in the setup menu?
Change the MAIN PCB.
The connection between LAN and SET is direct. So there is no need to check H/W if there is network problem.
If it is, the problem is MAIN CHIP(IC1)'s BGA soldering problem.
It must be changed to new board.
Samsung Electronics
Network Error
Yes
OK
No
Correctly connect the cable
or wireless jack.
Fail
Refer User Manual's Network Setup
Part and reset-up setting of Network.
Troubleshooting
4-23