Specifications - LG 50PX4D Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
Application Range
V
This spec is applied to the 50" PDP TV used DF-054B Chassis.
Specification
V
Each part is tested as below without special appointment.
1) Temperature : 25±5°C (77±9°F), CST : 40±5
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
Test Method
V
1) Performance : LGE TV test method followed.
2) Demanded other specification
Safety : IEC/EN60065
EMI : EN55013
EMS : EN55020
General Specification
V
1) Module Specification
No
1 Display Screen Device
2 Aspect Ratio
3 PDP Module
4 Screen Filter
5 Operating Environment
6 Storage Environment
7 Input Voltage

SPECIFICATIONS

Item
50 inch wide Color Display Module
16:9
PDP50X3####, RGB Closed Type
45% Total light transmittance (E-Mash)
1)Temp. : 0~40deg
2)Humidity : 0~85%
3)Temp. : -20~60deg
4)Humidity : 0~85%
100-240V~, 50/60Hz
Specification
- 8 -
Remark
PDP
Maker : NBK/ Mitsui/ LG Chemical
LGE SPEC.
Maker : Sony/ LG Innotek/ Sanken