Storage Interface
Chipset:
-
6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices
-
Support for RAID 0, RAID 1, RAID 5, and RAID 10
USB
Chipset:
-
U p to 8 USB 2.0/1.1 ports (2 ports on the back panel, 6 ports available through
the internal USB headers)
-
U p to 6 USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
6 x SATA 6Gb/s connectors
1 x CPU fan header
3 x system fan headers
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB 3.0/2.0 header
3 x USB 2.0/1.1 headers
1 x serial port header
1 x parallel port header
1 x Trusted Platform Module (TPM) header
1 x Clear CMOS jumper
Back Panel
1 x PS/2 keyboard/mouse port
Connectors
1 x D-Sub port
1 x DVI-D port
1 x HDMI port
4 x USB 3.0/2.0 ports
2 x USB 2.0/1.1 ports
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker
Out/Line In/Line Out/Microphone)
I/O Controller
iTE
I/O Controller Chip
®
Hardware
System voltage detection
Monitor
CPU/System temperature detection
CPU/System fan speed detection
CPU/System overheating warning
CPU/System fan fail warning
CPU/System fan speed control
* W hether the fan speed control function is supported will depend on the cooler you
install.
- 11 -
Hardware Installation