TV services. Installation is done dLAN TV SAT Starter Set's functions in Chapter 2, in next to no time: Simply connect your satellite sys- Chapter 3 shows you how to successfully start using tem directly to the dLAN TV SAT Multituner and con- your devices.
Page 11
For detailed information on our products or "dLAN", visit www.devolo.com. The Service Centre area con- tains downloadable product descriptions and docu- mentation, as well as updates to devolo software and device firmware. devolo dLAN TV SAT Starter Set...
Simple configuration of the multituner via dLAN be quickly and easily distributed everywhere in the Cockpit or web browser house this way. With the devolo dLAN TV SAT App, smartphones and tablets become receiver devices for unen- crypted satellite TV devolo dLAN TV SAT Starter Set...
TV SAT Starter Set (pay TV) or unencrypted transmissions in full HD The dLAN TV SAT Starter Set is the optimum solution to DVB S2 standard to any TV set in the home – all for starting to receive satellite TV on your TV set via the without antenna cables power line.
Page 14
Fig. 2 Fig. 1 The dLAN TV SAT Receiver Kit is a sensible addition to the dLAN TV SAT Starter Set if, for example, you plan on having a second tel- ore information on evision in the home. For m...
Page 15
For more information, go to www.dlna.org. If a DLNA media server (e.g. PC with Windows 7 oper- ating system, a router or NAS (Network Access Server)) devolo dLAN TV SAT Starter Set...
Initial use 15 3 Initial use This chapter covers everything you need to know about package setting your dLAN TV SAT Starter Set. Fig. 4 devolo dLAN TV SAT Starter Set...
AG reserves the right to change the package contents without prior notice. To set up a dLAN network, you need two dLAN (AV) devices (200 Mbps or 3.2 System requirements...
TV SAT Multituner is in standby mode. A few seconds after the device is switched on, it goes into PowerSave mode by default. devolo dLAN TV SAT Starter Set...
7 dLAN network. Network connection This is where you connect the dLAN TV SAT Multituner, for example, to your structured wiring via a commer- cially available network cable. devolo dLAN TV SAT Starter Set...
Page 20
A few seconds after you switch off the costs, we recommend leaving power- dLAN TV SAT to IP Receiver, the device changes to saving mode active. PowerSave mode by default and the display goes blank. devolo dLAN TV SAT Starter Set...
TV SAT to IP Receiver if the appropriate CI mod- dLAN TV SAT to IP Receiver to an analog playback de- ule from a pay-TV provider is inserted in the card slot. vice, such as a stereo system or headphones. devolo dLAN TV SAT Starter Set...
Page 22
Do not remove the USB device while a file trical S/PDIF input on an amplifier. is being played back or recorded. Also note the following if a high-capacity drive used: that dLAN TV SAT to IP Receiver can identify a high- devolo dLAN TV SAT Starter Set...
Page 23
TV SAT to IP Receiver to the mains supply. To avoid electrical damage when con- necting dLAN TV SAT to IP Receiver, always use the power pack supplied. The mains adapter is designed to supply electrical devices with 12 V DC. devolo dLAN TV SAT Starter Set...
This is where you connect the dLAN adapter to a com- nected to the network interface is puter and/or other network device using commercially switched on again, your dLAN device available network cables. can also be reached again via the elec- trical wiring. devolo dLAN TV SAT Starter Set...
Thanks to the inte- grated dLAN adapter, dLAN TV SAT Multituner is connected directly to the dLAN network (see also 3.8 Connecting the dLAN TV SAT to IP Receiver to the dLAN and devolo dLAN TV SAT Starter Set...
After successfully connecting all components of Then plug the dLAN adapter into a free wall the dLAN TV SAT Starter Set, switch on the socket. dLAN TV SAT to IP Receiver. The dLAN TV SAT to IP Receiver is now connected Then switch on the TV set.
Cockpit finds all reachable dLAN adapt- devolo. The data sent to devolo pertains only to the ers in your dLAN network, displays information about performance values of your dLAN devices. The data is...
To exclude the risk of fire as much as possible, batteries must never be sub- jected to excessive heat, such as direct Fig. 8 sunlight, fire or the like. devolo dLAN TV SAT Starter Set...
Page 29
28 Initial use devolo dLAN TV SAT Starter Set...
You will come directly to the configuration interface. 4.2 Menu description All menu functions are described in the corresponding interface as well as in the associated chapter in the devolo dLAN TV SAT Starter Set...
Page 31
In addition, you can update the firmware of your dLAN TV SAT Multituner here. In the Status overview area, you get general information about the dLAN TV SAT Multituner and all connected dLAN and LAN devices. devolo dLAN TV SAT Starter Set...
Tuner configuration 31 4.3 Status overview In the Status overview area you can track the status of the tuner and your connected dLAN and LAN devic- devolo dLAN TV SAT Starter Set...
You can add additional dLAN devices to your dLAN adapter in the Security ID field and confirm with network by tapping or clicking on Add device. To do Save. this, enter the security ID for the respective dLAN devolo dLAN TV SAT Starter Set...
It consists of 4 x 4 letters separated by dashes (e.g. ANJR-KMOR-KSHT- QRUV). Ensure that all dLAN adapters are connected to the power grid and computers or other network compo- nents as appropriate. devolo dLAN TV SAT Starter Set...
TCP/IP protocol as a component of your home net- The option Use this to accept network settings work. The IP address required for this can either be en- automatically from a DHCP server is enabled in the factory defaults. devolo dLAN TV SAT Starter Set...
In a dLAN network, all connected components must figure the password locally or for the entire ("Total") use the same password. The dLAN password can be network. defined in dLAN Cockpit, via the dLAN encryption devolo dLAN TV SAT Starter Set...
TV Sat to IP Receiver is to have priority over a live stream (data transmission via Internet), enable the option A recording programmed via the set- top box has priority over a normal stream. devolo dLAN TV SAT Starter Set...
Page 38
In this case, a live stream is automatically cancelled. There will be no message concerning this. devolo dLAN TV SAT Starter Set...
TV SAT Multituner. In the Management area you can reset the current configuration to the factory defaults, save it to your devolo dLAN TV SAT Starter Set...
TV SAT Multituner. In this way, you can for example generate configurations for different network environments, with which you can set up the device quickly and easily. devolo dLAN TV SAT Starter Set...
Save configuration file. Then enter a storage location and name for the settings file. To save the active configuration to your computer as a file, select the corresponding button in the area Man- devolo dLAN TV SAT Starter Set...
An existing configuration file can be sent to the dLAN TV SAT Multituner in the area Management Restore device configuration and enabled there. Select a suitable file via the Browse… button and devolo dLAN TV SAT Starter Set...
The firmware of the dLAN TV SAT Multituner includes the software for operating the device. If necessary, de- To bring the firmware up to the latest version, first go to the devolo website, www.devolo.com, and Ensure that the update procedure is download...
First Time installation dialogue: Select the desired language and confirm with OK. OK: to confirm a value or active control button Arrow keys: to move between different selection windows, options or buttons. devolo dLAN TV SAT Starter Set...
Page 45
Auto: automatic scaling of the screen format to the previously set display format. Pillar box: if you display "4:3" programme content on a "16:9" TV set or vice versa, a black border may appear on both sides of the screen. devolo dLAN TV SAT Starter Set...
All settings are selected via the menu in the dLAN TV SAT to IP Receiver using the remote control: The layout of the remote control buttons and keys is explained clearly in Section 5.3 The devolo remote control. You press the MENU button to access the main menu.
(PIN) is 0000. This PIN is set and changed under Settings Configura- tion PIN Settings. Highlight the channel you want to lock and select the Lock option using the arrow keys. After you confirm devolo dLAN TV SAT Starter Set...
Page 48
Favourites option and confirming with OK, or by channel you want to remove from the favour- ites list, and confirm with OK. If you press OK again, the channel is added again in the favourites list. devolo dLAN TV SAT Starter Set...
Page 49
OK. place the highlighted character with the one printed above the key. Channel list filter You can activate a filter function for each of the options in Section 5.2.1 Channel list by pressing P<P. devolo dLAN TV SAT Starter Set...
(see To record the current programme directly, call up the 4.3.3 Ethernet status): Record menu by pressing the record button (red dot) on the remote control. The Record OSD appears briefly devolo dLAN TV SAT Starter Set...
TV SAT to IP Receiver 1 in progress, so that genre. both recordings can be carried out successfully. LEFT double arrow button: goes back one page RIGHT double arrow button: goes forwards one page devolo dLAN TV SAT Starter Set...
USB drive. Press Pause to switch to Timeshift mode. Press Playback to continue viewing the pro- gramme from the time of the break. Playback is at normal playback speed x1. The time difference devolo dLAN TV SAT Starter Set...
Page 53
Start: the starting time is entered using the LEFT/ RIGHT arrow keys and the numeric pad. End: the end time is entered using the LEFT/ RIGHT arrow keys and the numeric pad. Duration: duration between starting and end times. devolo dLAN TV SAT Starter Set...
5.3.5 Switching during live recording Programmes highlighted in the programme list are in- side a transponder, those with a symbol are outside 5.4.1 Installation Under Installation you select settings to the dLAN TV SAT to IP Receiver. devolo dLAN TV SAT Starter Set...
Page 55
0 to 9. You select the polarisation from the selection list in the Polarisation field. You enter the symbol rate in the Symbol rate field using number keys 0 to 9. devolo dLAN TV SAT Starter Set...
TV set. Select the GREEN button to scan the selected satellite. Select the BLUE button to display the Tran- sponder list. Press OK to scan all satellites. devolo dLAN TV SAT Starter Set...
Page 57
TV output (SCART): The receiver can output The Software Version field displays the version video signals in RGB and CVBS format via the number. TV SCART output. Although the RGB format devolo dLAN TV SAT Starter Set...
Page 58
Yes. The device will switch off automatical- ly after 4 seconds if it has not been used during this time. First select the PowerSave mode field. You then acti- vate power-saving mode by selecting Yes and disable it with No. devolo dLAN TV SAT Starter Set...
A USB drive must be connected before the recording configuration menu can Oldest: recordings are deleted starting with the oldest, to make room for the programmed be displayed. timer. devolo dLAN TV SAT Starter Set...
TV SAT to IP Receiver. The IP address may be ei- nected USB drive and your setting (max. 1.5 ther static or dynamic. The Static option requires all hours). entries to be made manually. devolo dLAN TV SAT Starter Set...
Use the GREEN button to test the Internet velocity. 5.4.6 Load settings This function allows reset dLAN TV SAT to IP Receiver to its previously stored set- tings. All current settings are lost when the device is re- set. devolo dLAN TV SAT Starter Set...
-> (continue): continue recording. dLAN TV SAT to IP Receiver off and on again. Then reinsert the USB device. INFO: displays the expanded short descrip- tion. devolo dLAN TV SAT Starter Set...
Page 63
OPT: set subtitles/audio. INFO (help): activate function bar. GREEN: jump to selected time. Use EXIT to quit the menu and return to the YELLOW: set subtitle time correction. file list. RED: set subtitle position. devolo dLAN TV SAT Starter Set...
Displaying all files below for the CI module: Select Media Browser USB Device All; all files will If the module is inserted or removed, be displayed. the dLAN TV SAT to IP Receiver MUST devolo dLAN TV SAT Starter Set...
Page 65
Activation of the module will take a few moments. It may be necessary to set up some CI modules using the Conditional Access menu. To do so, open the Conditional Access menu and confirm with OK. devolo dLAN TV SAT Starter Set...
TV SAT App 65 6 dLAN TV SAT App 6.2 Installing dLAN TV SAT App With the free dLAN TV SAT App from devolo, you can After have hooked also receive unencrypted satellite television on your dLAN TV SAT Multituner and connected it to the smartphone or tablet.
& drop. Under Devices you find information about the con- The bar graph at the right edge of the screen shows nected tuner. the transmission quality of the Wi-Fi connection. devolo dLAN TV SAT Starter Set...
To encrypt a dLAN network, in which all associated de- vices are equipped with an encryption button, simply press the encryption button located on the device. Pressing this button will encrypt your dLAN network with a randomly generated password. devolo dLAN TV SAT Starter Set...
Page 69
68 dLAN network Fig. 9 devolo dLAN TV SAT Starter Set...
Page 70
Once you have your network. To integrate additional adapters in your successfully connected the new dLAN adapter, first network, repeat the above steps. press the encryption button (approx. 1 second) of one Fig. 10 devolo dLAN TV SAT Starter Set...
Fig. 11 7.2 dLAN Cockpit dLAN Cockpit is easy and intuitive to operate. After installing the devolo software, it can be found in the devolo dLAN Cockpit is a monitoring and encryption Start Programs devolo program group. program that detects all reachable dLAN devices in your home network and combines them in a secure network.
Page 72
Clicking an adapter icon with the mouse All adapters found in the network appear with as enables the corresponding dLAN device and highlights adapter icon with a corresponding product name. The adapter in the middle of the dLAN network identified devolo dLAN TV SAT Starter Set...
The data sent to devolo pertains only to the Settings and functions performance values of your dLAN devices. You can configure settings for the respectively high-...
Page 74
Enter the After you have added all the dLAN devices you want to new device as described in the Adding an adapter your dLAN network, select the Change password devolo dLAN TV SAT Starter Set...
Page 75
74 dLAN network section. The current network password is assigned automatically to the newly added device. devolo dLAN TV SAT Starter Set...
Which DiSEqC (Digital Satellite Equipment Con- cuit? trol) version is supported? You can use up to 3 systems simultaneously. The dLAN TV SAT to IP Receiver supports DiSEqC ver- sions 1.0 and 1.1. devolo dLAN TV SAT Starter Set...
Use the dLAN TV SAT Multituner exclusively with Follow the safety notes below to de- an earthed antenna system compliant with crease the risk of fire as much as possi- IEC60728-11:2010. ble: devolo dLAN TV SAT Starter Set...
Page 78
Never use the device with a power supply that does not meet the specifications provided on the rating plate. If you do not know what type of power supply you have at home, contact your dealer or energy supplier. devolo dLAN TV SAT Starter Set...
Plug the device directly into a wall socket. Fig. 12 To take full advantage of the filter function of the dLAN adapter and to improve data transmission in the network, always plug the multiple socket or devolo dLAN TV SAT Starter Set...
The following is a brief explanation of the buttons on Recording, play- start recording, playback records, stop the devolo remote control (from left to right): back, stop, playback, rewind records, pause records, rewind, pause, fast-forward records...
Instead, you can period begins at the day of delivery from the devolo dealer. War- ranty services carried out by devolo do not result in an extension of return these at no charge at your municipal collection the warranty period nor do they initiate a new warranty period.
Page 82
Claims for compensation of lost profits, indirect or consequen- tial detriments, are excluded. Suspension of the warranty devolo is not liable for lost data or retrieval of lost data in All warranty claims will be deemed invalid cases of slight and ordinary negligence.
Page 83
82 Appendix devolo dLAN TV SAT Starter Set...
Page 84
Network jack of the dLAN TV SAT Multituner 18 Ethernet 21 Network jacks 23 External hard drive 21 Network password 73 Factory default password 73 Operation 19 First use 25 Package contents 16 Generate secure password 73 Power pack 25 HDMI 12 devolo dLAN TV SAT Starter Set...
Page 85
Recording priority 36 S/PDIF 12 SCART 21 Security ID 33 Standby mode 19 Timer 51 USB 21 USB port (front) 20 Warranty 80 Windows 26 devolo dLAN TV SAT Starter Set...
Need help?
Do you have a question about the dLAN TV SAT Starter Set and is the answer not in the manual?
Questions and answers