Advertisement
Safety Precautions
Safety Precautions
RISK OF ELECfRIC SHOCK
RISK OF ELECfRIC SHOCK
CAUTION! To reduce the risk of electric shock and fire, do not remove the
CAUTION! To reduce the risk of electric shock and fire, do not remove the
cover or back plate of this device. There are no user serviceable parts inside.
cover or back plate of this device. There are no user serviceable parts inside.
Please refer all servicing to licensed service technicians. Avis: Risque de choc
Please refer all servicing to licensed service technicians. Avis: Risque de choc
electricque, ne pas ouvrir.
electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside a triangle is
CAUTION! The international symbol of a lightning bolt inside a triangle is
intended to alert the user to uninsulated "dangerous voltage" within the
intended to alert the user to uninsulated "dangerous voltage" within the
device's enclosure. The international symbol of an exclamation point inside
device's enclosure. The international symbol of an exclamation point inside
a triangle is intended to alert the user to the presence of important operat-
a triangle is intended to alert the user to the presence of important operat-
ing, maintenance and servicing information in the manual accompanying
ing, maintenance and servicing information in the manual accompanying
the device.
the device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide
CAUTION! To prevent electrical shock, match wide blade of plug to wide
slot, fully insert. Attention: Pour eviter les chocs electriques, introduire la
slot, fully insert. Attention: Pour eviter les chocs electriques, introduire la
lame la plus large de la fiche dans la borne correspondante de la prise et
lame la plus large de la fiche dans la borne correspondante de la prise et
pousser jusqu'au fond.
pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equip-
CAUTION! To reduce the risk of electrical shock, do not expose this equip-
ment to rain or moisture.
ment to rain or moisture.
1. Read Instructions-All safety and operating instructions should be read
1. Read Instructions-All safety and operating instructions should be read
before operating the device.
before operating the device.
2. Retain Instructions-The safety and operating instructions should be
2. Retain Instructions-The safety and operating instructions should be
retained for future reference.
retained for future reference.
3.
3.
Heed Warnings-All warnings on the device and in the operating
Heed Warnings-All warnings on the device and in the operating
instructions should be adhered to.
instructions should be adhered to.
4. Follow Instructions-All operating and safety instructions should be
4. Follow Instructions-All operating and safety instructions should be
followed.
followed.
&
&
5. Water
5. Water
Moisture-The device should never be used in, on or near
Moisture-The device should never be used in, on or near
water for risk of fatal shock.
water for risk of fatal shock.
6. Carts & Stands-The device should only be used on carts or stands rec-
6. Carts & Stands-The device should only be used on carts or stands rec-
ommended by the manufacturer.
ommended by the manufacturer.
7. Wall & Ceiling Mounting-The device should be mounted on a wall or
7. Wall & Ceiling Mounting-The device should be mounted on a wall or
ceiling only as recommended by the manufacturer.
ceiling only as recommended by the manufacturer.
8. Ventilation-The device should always be located in such a way that it
8. Ventilation-The device should always be located in such a way that it
maintains proper ventilation.
maintains proper ventilation.
It should never be placed in a built-in installation or anywhere that
It should never be placed in a built-in installation or anywhere that
may impede the flow of air through its heat sink.
may impede the flow of air through its heat sink.
9. Heat-Never locate the device near heat sources such as radiators, floor
9. Heat-Never locate the device near heat sources such as radiators, floor
registers, stoves or other heat-generating devices.
registers, stoves or other heat-generating devices.
10. Power Supply-The device should only be connected to a power supply
10. Power Supply-The device should only be connected to a power supply
of the type described in the operating instructions or as marked on the
of the type described in the operating instructions or as marked on the
device.
device.
11. Power Cord Protection-Power cables should be routed so they are not
11. Power Cord Protection-Power cables should be routed so they are not
likely to be stepped on or crushed by items placed on them or against
likely to be stepped on or crushed by items placed on them or against
them. Special attention should be paid to areas where the plug enters a
them. Special attention should be paid to areas where the plug enters a
socket or fused strip and where the cord exits the device.
socket or fused strip and where the cord exits the device.
12. Cleaning-The device should be cleaned in accordance with manufac-
12. Cleaning-The device should be cleaned in accordance with manufac-
turer's instructions.
turer's instructions.
13. Periods Of Non-Use-The device should be unplugged when not being
13. Periods Of Non-Use-The device should be unplugged when not being
used for extended periods.
used for extended periods.
14. Dangerous Entry---Care should be taken that no foreign objects or
14. Dangerous Entry---Care should be taken that no foreign objects or
liquids fall or are spilled inside the device.
liquids fall or are spilled inside the device.
15. Damage Requiring Service-The device should be serviced by licensed
15. Damage Requiring Service-The device should be serviced by licensed
technicians when:
technicians when:
• The plug or power supply cord has been damaged.
• The plug or power supply cord has been damaged.
• Objects have fallen on or liquid has spilled inside the device.
• Objects have fallen on or liquid has spilled inside the device.
• The device has been exposed to moisture.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits a
• The device does not appear to be operating properly or exhibits a
marked change in performance.
marked change in performance.
• The device has been dropped or the cabinet becomes damaged.
• The device has been dropped or the cabinet becomes damaged.
16. Service-The device should always be serviced by licensed technicians.
16. Service-The device should always be serviced by licensed technicians.
Only replacement parts specified by the manufacturer should be used.
Only replacement parts specified by the manufacturer should be used.
The use of unauthorized substitutions may result in fire, shock, or other
The use of unauthorized substitutions may result in fire, shock, or other
hazards.
hazards.
og~
og~
DO NOT OPEN
DO NOT OPEN
Power Supply
Power Supply
The fuse and power disconnect device are located on the back of the speaker.
The fuse and power disconnect device are located on the back of the speaker.
1.
1.
2. The disconnect device is the power cord, detachable at either the speaker or
2. The disconnect device is the power cord, detachable at either the speaker or
the wall.
the wall.
3. The power cord must be disconnected from the speaker before servidng.
3. The power cord must be disconnected from the speaker before servidng.
Unpacking Your Model
Unpacking Your Model
Please Inspect For Shipping Damage
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred in handling after it left our plant and should be
damage most likely occurred in handling after it left our plant and should be
reported at once to your Definitive dealer or the delivery company that
reported at once to your Definitive dealer or the delivery company that
delivered your loudspeaker. Please unpack your system carefully. Save all cartons
delivered your loudspeaker. Please unpack your system carefully. Save all cartons
and packing materials in case you move or need to ship your system. Record the
and packing materials in case you move or need to ship your system. Record the
serial number found on the back of the Center Channel in the Notes section of
serial number found on the back of the Center Channel in the Notes section of
this owner's manual.
this owner's manual.
Positioning Your Speakers
Positioning Your Speakers
Your new CS Series speaker is designed to add clarity and focus to the vocal range
Your new CS Series speaker is designed to add clarity and focus to the vocal range
and extend the musical image of your home theater. To optimize its performance,
and extend the musical image of your home theater. To optimize its performance,
please follow these simple guidelines. Although the follOWing recommendations
please follow these simple guidelines. Although the follOWing recommendations
will
will
usually yield the best results, whatever sounds best to you is correct.
usually yield the best results, whatever sounds best to you is correct.
Figure 1 - Positioning CS series Center Channel
Figure 1 - Positioning CS series Center Channel
.-..
.-..
1-2"~
1-2"~
(2.5-5
(2.5-5
em)
em)
8[~J8
8[~J8
II
II
To receive the full benefit of the bass radiators built into your
To receive the full benefit of the bass radiators built into your
least
least
cm) ofspace between the top of the speaker and any surface.
cm) ofspace between the top of the speaker and any surface.
1-2" (2.5-5
1-2" (2.5-5
Connecting Your Speakers
Connecting Your Speakers
Figure 2 - Wiring and Polarity
Figure 2 - Wiring and Polarity
Strip
Strip
(6mm) wire.
(6mm) wire.
1/4"
1/4"
Unscrew binding post and insert wire. Ensure that the speaker is always connected to
Unscrew binding post and insert wire. Ensure that the speaker is always connected to
1.
1.
2. Tighten until wire is secure.
2. Tighten until wire is secure.
above
above
A Center
A Center
Channel
Channel
Speaker should
Speaker should
be placed as
be placed as
or
or
close to the
close to the
center of your
center of your
television as
television as
possible with-
possible with-
below
below
out obstructing
out obstructing
your view.
your view.
II
II
Speaker leave at
Speaker leave at
CS
CS
Identify markings on wire and assign +/-.
Identify markings on wire and assign +/-.
-
-
Receiver/Amplifier
Receiver/Amplifier
nl
nl
-
-
-
-
I
I
..--t-.
..--t-.
the receiver or amplifier
the receiver or amplifier
+
+
to
to
+
+
and - to -.
and - to -.
Advertisement
