QA Supplies HR-50 Quick Manual page 2

Exploded View of HR-50 Humidifier Part Identification List
ID# Description
3015 Motor
(115V/60Hz)
3017 Capacitor
(115V/60Hz)
3019 Motor Cover
3020 Motor Support
3021 Cord
3022
Atomizing Screen
3023 Hub Assembly
3024 Disk
3025 Pump
3026 Fan Blade
3027 Mid Pan
* Maximum permissible water pressure in Pascal : 0.5 MPa
** Caution **
• If the power cord is damaged, it must be replaced by the
manufacturer, a service agent or similarly qualified person
in order to avoid a hazard
• Unplug device during cleaning
Water Connection
Place the unit on a level surface, such as a bench top or the floor.
In an environment with little or no ventilation, place the unit in a
central location. In a ventilated area, place unit near the intake end.
When the unit is in the desired location, connect a water supply to the
female ¼" NPT inlet.
See options as follows:
• Plumb directly to a water supply ( ¼" plastic tubing is preferred)
ID# Description
3028 Lower Pan
3029 Leg
3030 Fogging Head
3031 Filter
(optional)
3032 Screen
3033
Handle
3034 Housing
3035 Float Valve
3036 Float
3037 Reservoir Pan