Status Information - NETGEAR ReadyNAS 102 Hardware Manual

Status Information

You can obtain information about the status of your storage system by reviewing the
indicators listed in the following table.
Table 2. ReadyNAS 104 indicator descriptions
Indicator
Power button and LED
Disk LEDs (1, 2, 3, 4)
Disk activity LED
Rear panel Ethernet port
LEDs
Status display screen
ReadyNAS OS 6 Desktop Storage Systems
Description
Press this button to turn on the ReadyNAS. The LED has these states:
• Blinking. Booting or shutting down
• On. Powered on
• Off. Powered off
Each disk bay has an LED associated with it, in numerical order from left to right,
along the top of the front panel of the storage system. The disk LEDs have these
states:
• On. Power is on and the disk is operating normally.
• Blinking. The disk was removed, failed, or is resynchronizing. See the
display screen for details.
• Off. The disk bay is empty.
The disk activity LED has these states:
• On. At least one disk is present.
• Binking. A disk is active.
• Off. No disks are present.
Two LED status indicators are built into this port, one green and one amber.
They indicate port speed and activity as follows:
• Green on, amber off. 1000 Mbps connection speed, no activity
• Green blinking, amber off. 1000 Mbps connection speed, activity
• Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity
• Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, activity
• Green off, amber off. No connection.
Display messages about the status of your storage system. Note that the status
display screen goes to sleep to prevent burn-in; to wake it, press the Power
button. If the storage system reports an abnormal operation or error, the status
display screen stays on.
NETGEAR ReadyNAS 104
19