Morphy Richards Traditional Kettle User Manual page 3

B
¤
‹
‰
‚
fi
‡
Â
Features
⁄ Lid
¤ Lid knob
‹ Spout filter
› Concealed element
fi 360°connector
fl Cordless base unit
‡ Cord storage
· On/off switch
‚ Power on neon
„ Water level indicator
‰ Concealed element (inside)
 Whistle on/off switch
Using
Filling the kettle
1 Wherever possible fill through the
spout, as this helps to free the filter
from limescale build-up.
• The integrated water level indicator
allows you to easily see the amount
of water in the kettle.
4
• Always ensure that the level of water
in the kettle is filled to at least the
minimum level shown on the water
gauge. Should your kettle not have
a water gauge, always ensure that
the element is covered.
⁄
• Boil only as much water as you
need as this saves electricity.
2 Place the kettle on the base unit,
ensuring the kettle locates on to the
360° connector.
„
• The 360° connector allows the kettle
to be located at any position. - ideal
for left and right handed users and
›
for convenient positioning on the
·
worktop.
3 Plug in and switch on at the wall
socket.
fl
4 Switch the kettle on. The 'power on'
neon will light up.
5 When the water boils the kettle will
switch off automatically.
• If you are using the kettle for the first
time, pour away the boiled water
and refill.
6 Lift the kettle from the base unit by
the handle ensuring you hold the
kettle level.
A
• To re-boil, switch to ON again. If the
kettle has just switched off wait a
minute or so before switching it
back on again.
• If you do not put in enough water, or
switch on the kettle when it is
empty, the safety cut-out will switch
off the power automatically. If this
happens, refill and wait a few
minutes for the element to cool,
then use as normal.
Filter removal
1 Open the lid.
2 Lift the filter upwards from its holder.
3 To refit the filter, slide it into the side
wall guides of the filter holder until it
clicks into place.
WARNING: Unless the filter is
fitted correctly, the kettle lid
may not close and lock securely.
Descaling Whistle feature
IMPORTANT: As this kettle is fitted • There is a switch  on the cordless
with a concealed element it must be base of the product that can switch
descaled regularly. The frequency of the whistle on and off as desired.
descaling depends on usage and
the hardness of the water in your
area. Helpline
UK Customers
Excessive scale can cause the kettle
If you have any difficulty with your
to switch off before boiling and may
appliance, do not hesitate to call us.
damage the element invalidating the
We're more likely to be able to help
warranty.
than the store from where you
bought it.
It is essential that regular descaling
takes place.
Please have the following
information ready to enable our staff
Remove hard scale using a
to deal with your query quickly:
proprietary descaling product
suitable for stainless steel kettles.
• Name of the product
Alternatively use citric acid crystals
• Model number and serial number as
(available from most pharmacies) as
shown on the underside of the
follows.
appliance.
1 Fill the kettle 3/4 full, boil, then
YOUR TWO YEAR
unplug the kettle (remove the
GUARANTEE
cordless kettle from the base unit)
and stand it in an empty sink or It is important to retain the retailers
bowl. receipt as proof of purchase. Staple
your receipt to this back cover for
2 Add 50gm of citric acid crystals to future reference.
the water gradually, then leave the
kettle to stand. Do not use a more Please quote the following
concentrated solution. information if the product develops
a fault. These numbers can be found
3 As soon as the effervescence on the base of the product.
subsides, empty the kettle and rinse
it thoroughly with cold water. Model no.
4 Wipe the outside of the kettle Serial no.
thoroughly with a damp cloth to
remove all traces of acid which may All Morphy Richards products are
damage the finish. individually tested before leaving the
factory. In the unlikely event of any
IMPORTANT: Ensure that the appliance proving to be faulty within
electrical connections are 28 days of purchase it should be
completely dry before using the returned to the place of purchase for
kettle. it to be replaced.
If the fault develops after 28 days
Cleaning
and within 24 months of original
purchase, you should contact the
WARNING: Always disconnect
Helpline number quoting Model
the plug from the mains and
number and Serial number on the
allow the kettle to cool before
product, or write to Morphy
cleaning.
Richards at the address shown.
CAUTION: To prevent damage to the
You may be asked to return a copy
appliance do not use alkaline
of proof of purchase.
cleaning agents when cleaning, use
a soft cloth and a mild detergent.
Subject to the exclusions set out
below (see Exclusions) the faulty
Wipe the outside with a damp cloth.
appliance will then be repaired or
replaced and dispatched usually
IMPORTANT: Do not use abrasive
within 7 working days of receipt.
cleaners on the outside of the kettle
which may scratch the surface.
B
B
Â
o
5