Page 1
Of ce Laminator Of ce Laminator Neptune Neptune Please read these instructions before use. Przed użyciem proszę zapoznać się z tą instrukcją. Lire ces instructions avant utilisation. Перед эксплуатацией устройства ознакомьтесь с содержанием данной инструкции. Lea estas instrucciones antes de usar la máquina. Διαβάστε...
Start’ function which starts to warm-up at the 80 item after lamination and cooling. micron setting. You may select other temperature • For best results, use Fellowes ® brand pouches: settings as required. Enhance 80, Impress 100, Capture 125, Protect 175 ‘Reverse’ function •...
WORLDWIDE WARRANTY Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer. If any part is found to be defective during warranty period, your sale and exclusive remedy will be repair or replacement, at Fellowes’...
TROUBLESHOOTING Problem Possible cause Solution Switch on machine at rear next to plug No ‘red’ power on LED Machine is not switched on inlet and at the wall socket Ready light does not come on after a Move the machine to a cooler and Machine is in a hot or humid area long period dry area...
Declaration of Conformity Fellowes Manufacturing Company Yorkshire Way, West Moor Park, Doncaster, South Yorkshire, DN3 3FB, England declares that the model Neptune A3 conforms with the requirements of (RoHS) the Restriction of Hazardous Substances Directive 89/336/EEC. The Low Voltage Directive 72/73/EEC as amended by directive 92/68/EEC.
Need help?
Do you have a question about the Neptune A3 and is the answer not in the manual?
Questions and answers