Table of Contents
Advertisement
POWER SOURCES (CONTINUED)
Follow these precautions when using batteries in this device:
1.
Warning – Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
2.
Use only the size and type of batteries specified.
3.
Be sure to follow the correct polarity when installing the batteries as
indicated in the Battery Compartment. A reversed battery may
cause damage to the device.
4.
Do not mix different types of batteries together (e.g. Alkaline,
Rechargeable and Carbon-zinc) or old batteries with fresh ones.
5.
If the device is not to be used for a long period of time, remove the
batteries to prevent damage or injury from possible battery leakage.
6.
Do not try to recharge a battery not intended to be recharged; it can
overheat and rupture. (Follow battery manufacturer's directions.)
7.
Remove batteries promptly if consumed.
8.
Clean the battery contacts and also those of the device prior to
battery installation.
LINE IN JACK (SIDE OF UNIT)
Insert one end of the audio cable (not included) into the LINE OUT jack
on your external audio unit and the other end into the Line In jack on the
side of this unit. To listen to the external audio unit, turn this unit on using
the Power button, and turn on the external unit as well. Then press the
Line In button; the Line In button will light and the external audio unit's
output sound will be heard through this unit's speakers.
bATTERY PRECAUTIONS
OPTIONAL CONNECTION
6
Advertisement
Table of Contents
