Disassembly; Door; Door Switch; Thermistor - LG GR-S462 Service Manual

3. DISASSEMBLY

3-1 DOOR

Freezer Door
1. Remove the hinge cover by pulling it upwards.
2. Loosen hexagonal bolts fixing the upper hinge to the
body and lift the freezer door.
3. Pull out the door gasket to remove from the door foam
Ass'y.
Refrigerator Door
1. Loosen hexagonal bolts fixing the lower hinge to the
body to remove the refrigerator door only.
BOLT
2. Pull out the door gasket to remove from the door foam
Ass'y.
HINGE COVER
BOLT
HINGE
Figure 6
GASKET
Figure 7
LOWER HINGE
Figure 8
- 6 -

3-2 DOOR SWITCH

1. To remove the door switch, pull out it with a '—' type
driver as shown in (figure 9).
2. Disconnect the lead wire from the switch.

3-3 THERMISTOR

1. Remove the Cover Lamp-R by the use of '–––' type
driver inserting in the low holes of the cover.
2. Loose 2 screw.
3. Pull the Control Box-R.
4. Disconnect the Housing of lead wire.
5. Separate the INSU'Multi Duct and Control Box-R.
6. Separate the Thermistor and Control Box-R.
7. Separate the Thermistor and Display PCB.
THERMISTOR
DISPLAY PCB
MOTOR FAN
FAN

3.4 FAN AND FAN MOTOR

1. Remove the freezer shelf.
2. Separate the twist by pulling right.
3. Loosen 1 cap screw fixing the Grille Fan.
4. Loose 1 screw.
5. Pull out the Grille Fan and Shroud-F.
Figure 9
INSU' MULTI DUCT
CONT' BOX-R
COVER LAMP-R
COVER BLADE
Figure 10
Figure 11