Summary of Contents for LENCO BRP-430
- Page 1 BRP-430 BLU-RAY DISC PLAYER BLU-RAY DISC PLAYER BRP-430 For information and support, www.lenco.eu Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference.
-
Page 2: Table Of Contents
Content Important Safety Instructions 1. Overview 2. Front Panel and Rear Panel Illustration . Output Illustration . Remote Control 5.System Setting 6. Audio, Video, Picture files on disk or USB devices 7. BD-Live Operation 8. Trouble shooting 9. Specifications... -
Page 3: Important Safety Instructions
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 4: Overview
1. OVERVIEW This BD player has the capability of providing high-definition, cinema-like pictures and multi-channel audio. Soundtracks in more than one language are usually included on the disk, and subtitles in more languages are often included as well. 1.1 PLAYABLE DISK TYPES The following types of disks can play in the REF player: DVD-RW Blu-Ray Disks... -
Page 5: Front Panel And Rear Panel Illustration
2. Front Panel and Rear Panel Illustration 2.1 Front panel 8 9 10 POWER SENSOR STOP BUTTON CABIN DOOR NEXT BUTTON OPEN/CLOSE BUTTON DISPLAY PLAY/PAUSE BUTTON BD LIGHT PREV BUTTON 2.2 Rear panel(2CH Audio output) VIDEO OUT COAXIAL COMPONENT AUDIO OUT HDMI OUT(1080P) Component Video output (Y, Pb, Pr) USB 2.0... - Page 6 2.3 TV Set Connections HDMI VIDEO COMPONENT IN AUDIO IN YPbPr IN AUDIO IN VIDEO IN HDMI IN VIDEO OUT COAXIAL COMPONENT AUDIO OUT HDMI OUT(1080P) 2.3.1 CONNECT BD PLAYER TO TV SET BY AV CABLE Connect the BD player s FL and FR jack to the audio input jack on the TV. Connect the BD player s video out jack to the video input jack of TV.
- Page 7 2.3.3 Connecting to an AV Amplifier with Digital Audio Input VIDEO OUT COAXIAL COMPONENT AUDIO OUT HDMI OUT(1080P) Coaxial Digital Amplifier Notes: 1. Select the Coaxial digital audio output. 2. Set the digital Amplifier to the AV input connected to the BD player.
-
Page 8: Output Illustration
3. Output Illustration 3.1 Video Output Capabilities Each of the video outputs are capable of different levels of functionality, as described in the table below. Actual output will depend on setup menu settings and TV capabilities for HDMI televisions. BD Player Resolutions Supported Resolutions Supported Video Output... - Page 9 3.3 Connectors Description 3..3.1 SPDIF Digital Audio Output audio output The SPDIF output is a digital audio output. If you have a surround-sound receiver with a SPDIF (coaxial)input, connect this output to the coaxial input of the surround sound receiver. 3.3.2.
-
Page 10: Remote Control
4. Remote Control 1.Open/Close STANDBY OPEN/CLOSE Press this button to open/close the disk tray. ANGLE SUBTITLE AUDIO 2.Audio POP MENU/TITLE MENU RANDOM This key is used to cycle through the movie audio soundtracks available on the disk. (Not available on all BONUS VIEW SECONDARY... - Page 11 15.Play/Pause Pressing the bottom of this button will pause audio and video playback. Pressing the top of this button will resume playback. 16.STOP This button stops playback of a BD/DVD movie or files on disk. 17. CLEAR When entering numeric values via the numeric keypad , this button is used to clear a number entered incorrectly.
-
Page 12: System Setting
5.System Setting Press SETUP button under stop status or press RIGHT button in main menu. System will bring out setting menu as below picture: Main Menu Setting Menu System Network Info Settings Display Audio Language Parental 5.1Language 5.1.1 OSD: set language. 5.1.2 Menu: set language used for BD\DVD menu (not available on all disk). - Page 13 5.2Display 5.2.1 TV Type: Select to output NTSC or PAL video format . 5.2.2 Resolution: Set maximum resolution of your TV here to get best video quantity, if you are not sure, please use HDMI Auto, system will read the preferred resolution your TV supported via EDID.
- Page 14 5.3 Audio 5.3.1 PCM Downsampling: select right bitrate for PCM signal to ensure your SPDIF receiver can handle it correctly. It's no effect for HDMI digital audio output. 5.3.2 Digital Output: If you only have two speakers, set PCM stereo. If you connect receiver with more than two speakers, please refer to below tables: 5.3.3 Dynamic Range Control: means that you can allow the BD player to make the loud parts of amovie's audio track quieter than they would be in the theatre, without...
- Page 15 Or if you turn on your Blu-Ray player, your TV will automatically turn on and switch to HDMI input. Note: Not every CEC-Enabled unit is compatible with the BRP-430 or otherwise. 5.4.6 Reset Settings: Reset all settings to factory default (Parental Control level will not be reset).
-
Page 16: Audio, Video, Picture Files On Disk Or Usb Devices
5.5.8 Secondary DNS: Show current Secondary DNS or access user input while in “Manual” IP mode. Press ENTER key while Apply button is highlighted to activate setting you made, or press ENTER key while Cancel button is highlighted to cancel changes you made for network settings. - Page 17 6.4 Browsing video files 6.4.1 Select Videos icon in main menu which will appear after BD player read out disk or/and USB device. Press ENTER key while Video icon is highlighted, system will bring out a sub menu for file source selection.(Figure 5-1) Videos Optical Disk Settings...
- Page 18 6.5 Browsing Audio files 6.5.1 Select Music icon in main menu which will appear after BD player read out disk or /and USB device. Press ENTER key while Music icon is highlighted, system will bring out a sub menu for file source selection.( Figure 5-3 ) Videos Optical Disk Settings...
- Page 19 6.6 Browsing picture files 6.6.1 Select Pictures icon in main menu which will appear after BD player read out disk or/and USB device . Press ENTER key while Pictures icon is highlighted, system will bring out a sub menu for file source selection.( Figure 5-5) Videos Optical Disk Settings...
- Page 20 6.7 File playback 6.7.1 Refer to Figure 5-7, select “ Play All” to play all selected type files on selected media, or select ”Play Current Folder” to play all selected type files in current folder. Folder1 Please select play mode Add all to Playlist Folder2 Play All...
-
Page 21: Bd-Live Operation
7. BD-Live Operation 7.1 D escription Some (but certainly not all) BD disks contain additional features that are made available to players that are connected to the internet, and have additional memory added. These additional features may include things like -the ability to download new movie trailers, -additional 'commentary' by actors and directors, multiperson... - Page 22 7.4.3 The player will connect to internet and show download menu as below picture. Note: This can take several minutes. 7.4.4 You can select the content to download from the Previews sub menu. Note: This can take several minutes. 7.4.5 The downloaded content is stored under My Downloads. You can choose to either play back or delete the downloaded content 7.5 BD-Live Notes 7.5.1 This player only supports the connection of USB memory in order to store BD 2.0...
-
Page 23: Trouble Shooting
8. Trouble shooting Ensure you have entered the correct AV input for your TV. Ensure you have entered the correct AV input for your TV. -
Page 24: Specifications
9. Specifications General Power requirements: AC 100-240 Volt, 50/60Hz Power consumption: 35W Discs Compatibility: BD,DVD,DVD+/-R/RW,VCD,CD-DA,CD-R/RW . Video out Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin jack x 1 , HDMI and YUV Component Audio out 2 channel out: RCA pin jackx2 Coaxial out: 0.5V(p-p)75 , RCA pin Jack x l Frequency response: 20Hz to 20kHz S/N ratio:>90dB...