5.1. How to Reflash the BIOS in MS-DOS Mode
1. Extract the downloaded Zip file to your hard disk(s) or floppy disk. This procedure assumes drive A.
2. Restart the computer in MS-DOS mode. (For Windows 2000/XP, you need a startup disk to restart
the computer in MS-DOS mode.)
3. Change the command prompt to A:\>.
4. To back up the current BIOS, at the A:\> prompt, type[BIOS flash utility name]
- s [ B I O S f i l e n a m e ] (example: gvf19 -s x88t5hp.f1) and press Enter.
5. To flash BIOS, at the A:\> prompt, type[ B I O S
[ B I O S f i l e n a m e ] (example: gvf19 -p x88t5hp.f2) and press Enter.
6. Wait until it's done, then restart your computer.
GV-NX88T512HP/256H Graphics Accelerator
5. Appendix
f l a s h
- 34 -
u t i l i t y
n a m e ]
- p