Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for BFG Technologies Tech
-
Page 2: Table Of Contents
“Remove” and select “Display Drivers” only if prompted. Step 1B. If you are adding your new BFG Tech graphics card to a system with integrated on- the-motherboard graphics, you must disable the integrated graphics first. The most effective method is to disable it in the BIOS. -
Page 3: Section Ii Installing The Graphics Card
Step 3. Unplug the power cord and monitor from the back of the computer. Step 4. Remove the computer’s side panel or cover. Step 5. Identify the slot on the motherboard that matches the type of BFG Tech graphics card you purchased. - Page 4 Step 10. Replace the computer’s side panel or cover. Step 11. Connect the monitor cable to the matching connec- Power tor on the BFG Tech graphics card you just installed. If your Cord monitor has a DVI-D or DVI-I cable then connect it to the white DVI-I connector.
-
Page 5: Section Iii Installing The Drivers
Step 13B. In Windows 98 or ME keep clicking “Next” until the wizard is complete, then click “Finish” and restart the computer. Step 14. Insert the BFG Tech Driver CD into your CD/DVD-ROM drive. The CD will auto-run and bring up a menu of language options. If the CD does not auto-run, click “Start” > “My Computer”... - Page 6 8. Choose “Display a list of all if the drivers in a specific location…” then click “Next”. 9. Click “Have Disk” then click “Browse”. 10. Navigate to the CD/DVD-ROM drive containing your BFG driver CD, and find the folder, ‘Win98_ME’. 11. Open the “inf” file and then click “OK”.
-
Page 7: Section V Setting Up Nview And Hdtv/Video-Out
1. A user with Windows NT Administrator privileges must install these drivers. Please consult your IT dept. or Microsoft Windows documentation. 2. After booting up and logging in, insert the BFG driver CD. 3. Click “Start” then “Settings” and “Control Panel”. -
Page 8: Section Vi Setting Up Video-In
GRAPHICS CARD FULL INSTALL MANUAL HDTV Out & S-Video Out (9-Pin) 1. Connect the included HDTV dongle to the graphics card. 2. Connect a composite, component or RCA video cable to the appropriate HDTV dongle con- nector and to the display you wish to output an image to. HDTV Out &... -
Page 9: Section Vii Troubleshooting
“in” and to the broadcasting device you wish to input an image from. Step 2. Insert the BFG Tech Driver CD into your CD/DVD-ROM drive. The CD will auto-run and bring up a menu of language options. If the CD does not auto-run, click “Start” > “My Computer”... - Page 10 1. Check to see that your power supply meets the minimum requirements found on the side panel of the BFG Tech graphics card box. While wattage may appear to be sufficient, amperage may not. If it looks like your power supply does not or barely meets the minimum requirements, replace it with a more powerful model.
- Page 11 GRAPHICS CARD FULL INSTALL MANUAL 4. Select “NVIDIA Drivers” and click “Change/Remove”. If it asks you which NVIDIA driv- ers you want to remove, make sure you only select graphics card drivers. Click “No” if prompted to reboot. 5. While still viewing the “Add or Remove Programs” screen, examine the list and make sure that you don't have any other drivers installed from your previous graphics card.
-
Page 12: Section Viii Technical Support
Outside the US call (toll call, charges apply) 00 + 1.630.637.2459 Technical Support is also available via e-mail at support@bfgtech.com A Returns Material Authorization number (RMA #) must be issued by BFG Tech Support before any product is returned to BFG Technologies. Product shipped to BFG Technologies without an RMA # will be refused and returned to shipper.
Need help?
Do you have a question about the Tech and is the answer not in the manual?
Questions and answers