Advertisement
7
Turn wind knob until it stops,
press shutter release, and again
turn wind knob until it stops.
These two winds take up film
leader and advance fresh film
into
position.
Winding
film
also cocks the shutter,
pr€-
venting double exposure. Since
shutter
will
be cocked each
time film is wound, be careful
not to press shutter
release
before you are ready to take
your first picture.
The
exposure
counter
dial
must be set each time you re-
load. After fresh fiIm has been
advapced into position, press
counter dial down and turn to
20 (for a 2O exposure roll) or to
0 (for a 36 exposure roll). The
dial makes a complete revolu-
tion each time you wind the
film, and automatically
stops
at the mark
indicating
the
number of exposures remain-
ing on the film.
u n l o a d i n g
When end of fi.Im ls reached,
film must be rewound back into
film cartridge. Pull wind knob
completely up and rotate it 1Z
turn backwards. Using rewind
knob,rewind film until counter
dial has stopped rotating. Con-
tinue to turn knob a few extra
revolutions
to be sure film is
entirely
in
cartridge.
Open
back, remove film cartridge,
and have film developed as
soon as possible.
Advertisement
