Install The Push Battery; Install The Chime Battery - Honeywell RCWL330A Installation Instructions Manual

Installation Instructions
Install the Bell Push Battery
Insert the CR2032 coin cell. Ensure the face
marked "+" is facing up (Fig. 2).
Install the Chime Batteries
To remove the chime battery cover, press at point C
and slide the cover back, then lift off. Insert
4 LR14 "C" alkaline batteries (not
supplied). Observe polarity as
marked inside the battery com-
partment (Fig. 3).
69-2148EFS—01
69-2148EFS_A.indd 4
C
4
CR2032
+
Fig. 2
M27153
Fig. 3
M27270
3/20/2008 9:34:24 AM