Sony MDS-JB930 Service Manual page 15

SLIDER (CAM)
4 bracket (Guide L)
1 two screws (P2.6x6)
2 harness
3 leaf spring
BASE UNIT (MBU-5D), BD BOARD
5 flexible board
(CN104)
6 flexible board
(CN101)
7 BD board
7 slider (Cam)
• Note for Installation of Slider A (Cam)
Set the shaft of Cam gear to
be at the position in the figure.
6 bracket (Guide R)
2 base unit (MBU-5D)
1 three screws
(P2.6 6)
4 screw (M1.7
4)
Set the shaft of Lever (O/C) to
be at the position in the figure.
5 two screws (P2.6x6)
3 Remove the solder (Seven portion).
15