Advertisement
Quick Links
Distributing International, Inc.
1 – BASIC INSTALLATION WITH ISO CONNECTORS
2 – USING CAR SPEAKERS FOR CARS WITH AMPLIFIERS, BUT NO
VEHICLE-SPECIFIC ADAPTERS
3 – USING AN EXTRNAL SPEAKER(S)
4 – VEHICLE-SPECIFIC ADAPTERS FOR CARS WITHOUT AMPLIFIERS
5 – VEHICLE-SPECIFIC ADAPTERS FOR CARS WITH AMPLIFIERS
6 – ADDITIONAL TIPS
6.1 – Mute Issues
6.2 – Harness Issues
IMPORTANT Metra 6100 or 7100 Series harnesses can be used to ease the installation in many cases.
Copyright PARROT - All rights reserved.
Tel. (954)929-2524
PARROT CAR KITS
INSTALLATION NOTES
34 SOUTH FEDERAL HIGHWAY, SUITE A
DANIA BEACH, FL 33004
www.NiceStuffOnline.com
info@NiceStuffOnline.com
Fax (954)929-2455
Advertisement
Related Manuals for Parrot Metra 6100
Summary of Contents for Parrot Metra 6100
- Page 1 6 – ADDITIONAL TIPS 6.1 – Mute Issues 6.2 – Harness Issues IMPORTANT Metra 6100 or 7100 Series harnesses can be used to ease the installation in many cases. Copyright PARROT - All rights reserved. 34 SOUTH FEDERAL HIGHWAY, SUITE A DANIA BEACH, FL 33004 Tel.
- Page 2 Scroll Wheel - ISO car radio harnesses (2) - Manual Parrot CK3100 adds LCD display instead of Keypad Parrot CK3300 adds GPS receiver antenna Electronic control box Try to mount the control box in an accessible location, away from HVAC unit. Do not install the control box close to the heater or to the air-conditioning system.
- Page 3 www.NiceStuffOnline.com info@NiceStuffOnline.com Distributing International, Inc. 1. BASIC INSTALLATION WITH ISO CONNECTORS Installation in a Car with Radio with ISO sockets (see Diagram) 1. Disconnect the speaker harness and the power harness from the back of the car radio 2. Connect the mute cable and power cable female connectors to the back of the radio 3.
- Page 4 www.NiceStuffOnline.com info@NiceStuffOnline.com Distributing International, Inc. DIAGRAM 34 SOUTH FEDERAL HIGHWAY, SUITE A DANIA BEACH, FL 33004 Tel. (954)929-2524 Fax (954)929-2455...
-
Page 5: Using External Speaker(S)
If the car radio is pre-amplified and if Parrot does not offer a vehicle-specific harness for the car and radio configuration, it is still possible to install the Parrot, so that the sound comes through the car speakers and the car radio can be muted. To do it, you’ll need to splice in. - Page 6 www.NiceStuffOnline.com info@NiceStuffOnline.com Distributing International, Inc. The connection between the mute cable and the speaker(s) is made by selecting one or two front speaker pair(s) on the male ISO connector of the mute cable. The front right pair (blue+ /green-) or the front left pair (red+ /orange-) will work. Cut the pair selected and connect it to the auxiliary speaker.
- Page 7 If you do not have an adapter, you will need to connect the wires one by one. The Parrot mute cable has two black ISO connectors. The Parrot power cable has also 2 grey ISO connectors. Each of these four connectors is uniquely identified by a locating notch or pin.
-
Page 8: Additional Tips
www.NiceStuffOnline.com info@NiceStuffOnline.com Distributing International, Inc. - You will need to connect these three colored wires to an adapter SPEAKER - LINE. These colored wires will need to be plugged behind your radio into the line plugs. They will therefore need this adapter that you can find in electronics stores, i.e. Radio Shack. - Once you have the adapter, you will have to plug the red wire into the line plug +, the white wire into the line plug -, and the blue wire into the Mute input of the radio.