Panasonic KX-T7880 Reference Manual page 12

PROGRAMMING FOR SPEED OR
ONE-TOUCH DIAGSLT MODE
To enter station programming mode;
Set the POWER/RINGER switch to "ON," while pressing (PROG button.
The TALKIBATT. LOW indicator lights red.
You hear a conJirmation tone.
To exit;
Press (TALK1 button or place the handset on the charging unit.
D
Storing telephone numbers
Flexible
(Fl - F4)
AUTO
FYXFER
For Speed Dialing;
1.
Enter Programming Mode.
2. Enter
/phone number ( .
3. Press m button.
4. Enter
Ispeed dialing number ( (0 -
5. To store an another number, repeat
2 through 4.
9).
steps
6. Exit from programming mode.
For One-Touch Dialing;
1.
Enter Programming Mode.
2. Enter
1 phone number I.
3. Press the desired w] key or
IFS/XFERI button.
4. To store an another number, repeat steps
2 through 3.
5. Exit from programming mode.
Conditions:
l
Ten phone numbers for Speed Dialing and five phone numbers for One-Touch Dialing
can be stored.
l
Each number has a maximum of 20 digits. The valid characters are 0 through 9, * , # ,
and the FLASH and PAUSECONF buttons.
l
If you do not enter anything for 30 seconds during programming, the programming
mode is canceled.
12