Transmitter Operation
Charging the Wireless Transmitter
1.Insert one end of the AC adapter into the Transmitter's 12V DC
1.
power plug-in and the supplied adapter into an electrical outlet.
1.
(The charging indicator illuminate red indicating it is charging.)
IMPORTANT:
When charging the transmitter for the first time, charging time is
approximately five hours for a full charge.
2.Charging time is approximately five hours each time.
3.The charging indicator illuminates green when the unit is fully
1.
charged.
4.Built-in Rechargeable battery runs up to five hours on a single
1.
charge.
5.The POWER INDICATOR illuminates red when the battery is low.
6.You can use the built-in battery to power the transmitter by
1.
switching the channel to either CH1, CH2 or CH3, or you can
1.
leave the transmitter plugged in and use supplied AC adapter.
9